Furutech

The ADL GT8-A is no ordinary cable; it’s engineered and produced with Furutech’s Pure Transmission technology and features α (Alpha) OCC Silver Copper alloy conductor (28AWG) for minimal transmission loss and 24k gold-plated USB A-type connector. The cable achieves top-grade noise isolation using three-layers shielding – two aluminum foil and tinned copper braiding – in a RoHS-compliant sheath. The main conductors are treated with Furutech’s α (Alpha) Process – a deep cryogenic and demagnetizing treatment. The result is outstanding, wideband, colorful and engaging sound that audiophiles and music lovers will love. Alpha Design Labs (ADL) is extremely proud of its worldwide reputation for innovative engineering, extraordinary build quality and legendary sonic performance. Originally launched as an entry-level line for Furutech, ADL has now evolved into a genuine leader in cutting-edge technology with its current line of desktop and portable audio components, headphones, earphones and cables. Using Furutech’s Pure Transmission Technology as the foundation for products that are carefully engineered as well as innovative, ADL has achieved a level of performance that has been previously unavailable at this price point. The Pure Transmission process focuses on one objective—to deliver a pure, open and quick sound that is preserved throughout the entire signal chain from the source to the speakers or headphones. As a result, Pure Transmission allows ADL components possess a greater sense of dynamics, power and resolution. You’ll hear deeper into your favourite recordings than ever before. Adding more ADL components to the playback chain— including our full line of portable headphone amplifiers, DACs, headphones and cables—will increase the sonic advantages you’ll experience from Pure Transmission Technology. Features High End Performance i-Device Cable Lightning to USB-A Apple MFi Certified 24K Gold-Plated USB A-type Connector Made in Japan Specifications Conductor 1:7/0.127 (Alpha) OCC Siver Copper Alloy (SYNC) Insulation 1: Special grade HDPE Green / White 0.72+0.05mm Shield 1: Al foil face out Conductor 2: 19/0.127 pure Silver-Plated Alpha OCC (Power) Insulation 2: RoHS Compliant 105C Flexible PVC Red / Black 1.0+0.05mm Shield 2: Al Foil face out Shield 3: 16/6/0.07 Alpha tinned copper wire braiding Outer Sheath: RoHS Compliant Flexible PVC Intertexture: 24Ingot (Purple/Black); Mush: 18 Cable Lengths: GT8-A 0.10M Cable length: 10cm (3.9in) GT8-A 0.18M Cable length: 18cm (7in) GT8-A 1.0M Cable length: 100cm (3.2ft)

The ADL GT8-A is no ordinary cable; it’s engineered and produced with Furutech’s Pure Transmission technology and features α (Alpha) OCC Silver Copper alloy conductor (28AWG) for minimal transmission loss and 24k gold-plated USB A-type connector. The cable achieves top-grade noise isolation using three-layers shielding – two aluminum foil and tinned copper braiding – in a RoHS-compliant sheath. The main conductors are treated with Furutech’s α (Alpha) Process – a deep cryogenic and demagnetizing treatment. The result is outstanding, wideband, colorful and engaging sound that audiophiles and music lovers will love. Alpha Design Labs (ADL) is extremely proud of its worldwide reputation for innovative engineering, extraordinary build quality and legendary sonic performance. Originally launched as an entry-level line for Furutech, ADL has now evolved into a genuine leader in cutting-edge technology with its current line of desktop and portable audio components, headphones, earphones and cables. Using Furutech’s Pure Transmission Technology as the foundation for products that are carefully engineered as well as innovative, ADL has achieved a level of performance that has been previously unavailable at this price point. The Pure Transmission process focuses on one objective—to deliver a pure, open and quick sound that is preserved throughout the entire signal chain from the source to the speakers or headphones. As a result, Pure Transmission allows ADL components possess a greater sense of dynamics, power and resolution. You’ll hear deeper into your favourite recordings than ever before. Adding more ADL components to the playback chain— including our full line of portable headphone amplifiers, DACs, headphones and cables—will increase the sonic advantages you’ll experience from Pure Transmission Technology. Features High End Performance i-Device Cable Lightning to USB-A Apple MFi certified 24K Gold-Plated USB A-type Connector Made in Japan Specifications Conductor 1:7/0.127 Siver-Plated Alpha OCC (Sync) Insulation 1: Special grade HDPE Green / White 0.72+0.05mm Shield 1: Al foil face out Conductor 2: 19/0.127 Silver-Plated Alpha OCC (Power) Insulation 2: RoHS Compliant 105C Flexible PVC Red / Black 1.0+0.05mm Shield 2: Al Foil face out Shield 3: 16/6/0.07 Alpha tinned copper wire braiding Outer Sheath: RoHS Compliant Flexible PVC Cable Lengths: GT8-A 0.10M Cable length: 10cm (3.9in) GT8-A 0.18M Cable length: 18cm (7in) GT8-A 1.0M Cable length: 100cm (3.2ft)

The ADL iHP-35 series are no ordinary cables; they’re engineered and produced with Furutech’s Pure Transmission technology and feature silver-plated (Alpha) OCC conductors for minimal transmission loss. The cable achieves top-grade noise isolation – in a RoHS-compliant sheath. The main conductors are treated with Furutech’s (Alpha) Process – a deep cryogenic and demagnetizing treatment. The result is outstanding, wideband, colorful and engaging sound that audiophiles and music lovers will love. High-quality headphones are a must in the age of personal, portable electronics, but many are supplied with inferior throw-away cables. Headphone listening is an intimate experience and enthusiasts always want better sound. ADL's iHP-35 series cables accomplish that in spectacular fashion with headphones, players and headphone amplifiers. The iHP-35 series will make the perfect connection! iHP-35 II i s terminated at both ends with a Furutech rhodium –plated FT-735SM 3.5mm stereo connector. For ULTRASONE PRO line series (PRO line 2500, PRO line 750, PRO line 650, PRO line 550) Alpha Design Labs (ADL) is extremely proud of its worldwide reputation for innovative engineering, extraordinary build quality and legendary sonic performance. Originally launched as an entry-level line for Furutech, ADL has now evolved into a genuine leader in cutting-edge technology with its current line of desktop and portable audio components, headphones, earphones and cables. Using Furutech’s Pure Transmission Technology as the foundation for products that are carefully engineered as well as innovative, ADL has achieved a level of performance that has been previously unavailable at this price point. The Pure Transmission process focuses on one objective—to deliver a pure, open and quick sound that is preserved throughout the entire signal chain from the source to the speakers or headphones. As a result, Pure Transmission allows ADL components possess a greater sense of dynamics, power and resolution. You’ll hear deeper into your favourite recordings than ever before. Adding more ADL components to the playback chain— including our full line of portable headphone amplifiers, DACs, headphones and cables—will increase the sonic advantages you’ll experience from Pure Transmission Technology. Features Terminated at both ends with a Furutech rhodium –plated FT-735SM 3.5mm stereo connector Alpha OCC Silver Copper Alloy Conductor For ULTRASONE PRO line series (PRO line 2500, PRO line 750, PRO line 650, PRO line 550) Made in Japan Specifications Cable lengths: 130cm (4.1ft) and 300cm (9.5ft)

The ADL iHP-35 series are no ordinary cables; they’re engineered and produced with Furutech’s Pure Transmission technology and feature silver-plated (Alpha) OCC conductors for minimal transmission loss. The cable achieves top-grade noise isolation – in a RoHS-compliant sheath. The main conductors are treated with Furutech’s (Alpha) Process – a deep cryogenic and demagnetizing treatment. The result is outstanding, wideband, colorful and engaging sound that audiophiles and music lovers will love. High-quality headphones are a must in the age of personal, portable electronics, but many are supplied with inferior throw-away cables. Headphone listening is an intimate experience and enthusiasts always want better sound. ADL's iHP-35 series cables accomplish that in spectacular fashion with headphones, players and headphone amplifiers. The iHP-35 series will make the perfect connection! iHP-35M-Plus is terminated with a Furutech one piece construction α(Alpha) Pure copper conductor Rhodium-plated 3.5mm stereo connector to a Furutech rhodium-plated MMCX connector. For SHURE 535, 425, 315, 215 Headphone use Alpha Design Labs (ADL) is extremely proud of its worldwide reputation for innovative engineering, extraordinary build quality and legendary sonic performance. Originally launched as an entry-level line for Furutech, ADL has now evolved into a genuine leader in cutting-edge technology with its current line of desktop and portable audio components, headphones, earphones and cables. Using Furutech’s Pure Transmission Technology as the foundation for products that are carefully engineered as well as innovative, ADL has achieved a level of performance that has been previously unavailable at this price point. The Pure Transmission process focuses on one objective—to deliver a pure, open and quick sound that is preserved throughout the entire signal chain from the source to the speakers or headphones. As a result, Pure Transmission allows ADL components possess a greater sense of dynamics, power and resolution. You’ll hear deeper into your favourite recordings than ever before. Adding more ADL components to the playback chain— including our full line of portable headphone amplifiers, DACs, headphones and cables—will increase the sonic advantages you’ll experience from Pure Transmission Technology. Features Terminated with a Furutech one piece construction α(Alpha) Pure copper conductor Rhodium-plated 3.5mm stereo connector to a Furutech rhodium-plated MMCX connector For SHURE 535, 425, 315, 215 Headphone use Alpha OCC Silver Copper Alloy Conductor Made in Japan Specifications Cable lengths: 90cm (2.95ft) / 130cm (4.26ft)

The ADL iHP-35 series are no ordinary cables; they’re engineered and produced with Furutech’s Pure Transmission technology and feature silver-plated (Alpha) OCC conductors for minimal transmission loss. The cable achieves top-grade noise isolation – in a RoHS-compliant sheath. The main conductors are treated with Furutech’s (Alpha) Process – a deep cryogenic and demagnetizing treatment. The result is outstanding, wideband, colorful and engaging sound that audiophiles and music lovers will love. High-quality headphones are a must in the age of personal, portable electronics, but many are supplied with inferior throw-away cables. Headphone listening is an intimate experience and enthusiasts always want better sound. ADL's iHP-35 series cables accomplish that in spectacular fashion with headphones, players and headphone amplifiers. The iHP-35 series will make the perfect connection! iHP-35X II is terminated with a Furutech rhodium plated FT-735SM 3.5mm stereo connector to a Furutech rhodium-plated mini XLR connector. For AKG Studio and AKG Studio MKII series, Q701, K702, K181 DJ, Pioneer HDJ-2000, ADL H118 and H128 headphone use. Alpha Design Labs (ADL) is extremely proud of its worldwide reputation for innovative engineering, extraordinary build quality and legendary sonic performance. Originally launched as an entry-level line for Furutech, ADL has now evolved into a genuine leader in cutting-edge technology with its current line of desktop and portable audio components, headphones, earphones and cables. Using Furutech’s Pure Transmission Technology as the foundation for products that are carefully engineered as well as innovative, ADL has achieved a level of performance that has been previously unavailable at this price point. The Pure Transmission process focuses on one objective—to deliver a pure, open and quick sound that is preserved throughout the entire signal chain from the source to the speakers or headphones. As a result, Pure Transmission allows ADL components possess a greater sense of dynamics, power and resolution. You’ll hear deeper into your favourite recordings than ever before. Adding more ADL components to the playback chain— including our full line of portable headphone amplifiers, DACs, headphones and cables—will increase the sonic advantages you’ll experience from Pure Transmission Technology. Features Terminated with a Furutech rhodium plated FT-735SM 3.5mm stereo connector to a Furutech rhodium-plated mini XLR connector Alpha OCC Silver Copper Alloy Conductor For AKG Studio and AKG Studio MKII series, Q701, K702, K181 DJ, Pioneer HDJ-2000, ADL H118 and H128 headphone use. Made in Japan Specifications Cable lengths: 130cm (4.1ft) and 300cm (9.5ft)

The entry level Furutech Alpha Line 1 interconnects are more for the mid-range system. Out of the box you can see straight away that these are a quality pair of interconnects. Features Length: 1m High Performance 24k Gold Plated FP-160 RCA Connectors Eutectic cast copper alloy center pin Copper alloy body and locking collet Teflon insulation U-OFC conductor Alpha copper alloy gold plated RCA connectors Special grade polyethylene Insulation Made in Japan Reviews & Awards What Hi-Fi

The mid range level Furutech Alpha Line 2 interconnects is coloured in Dark green, and finished off with the FP-160 RCA connectors. This pair of interconnects look really smart. In terms of specifications its all there. Oxygen free copper, 24K Gold plated RCA connectors, insulation. If the Alpha line 1 is anything to go by, then you would expect this to be a jump up. Length: 1m High Performance 24k Gold Plated FP-160 (G) RCA Connectors Eutectic cast copper alloy centre pin Copper alloy body and locking collet Teflon Insulation Alpha U-OFC solid core conductor (Balanced type) Alpha copper alloy gold plated RCA connectors Special grade polypropylene Insulation Made in Japan

The Alpha Line Plus, is the top of the range Alpha Interconnect. This is evident straight away through the quality of the interconnects. The design and engineering show up other companies at this price bracket. What differentiates this from the other models is the use of nonmagnetic 24K gold cast copper alloy. Dress in a PVC jacket that is flexible which hides the high density Polyethylene foam. Furutech use their two stage Cryogenic and demagnetization process which improves electrical conductivity and so power and signal transfer. The demagnetization part of the process uses controlled attenuation to completely eliminate magnetization for immediately more vivid and colorful improvements. Length: 1m High performance beautifully engineered gold plated RCA connectors FP-110 (G) Connectors RCA Centre pin is 24K gold-plated nonmagnetic OCC conductor with a Teflon Dielectric RCA connector backbone composed of non magnetic 24K gold-plated eutectic cast copper alloy with beautifully finished nonmagnetic copper alloy outer locking shell Alpha OCC conductor (Balanced type) Special grade high density polyethylene foam Insulation (Red, White) Tow cores with cotton filler twisted together, barrier layer wrap with resonance suppressing unwoven tape Made in Japan

15AWG α(Alpha) OCC Conductor Speaker cable (2 x 1.42 sq mm) Cable Type: Two Cores with Cotton Fillers Twisted Together Material: μ-OCC FEATURES ・α (Alpha)-OCC Conductor (56 pcs/0.18mm) ・Made in Japan SPECIFICATIONS ・Conductor : α (Alpha)-OCC Conductor(56 pcs/0.18mm) ・Insulation : Special Polyethylene (Red/ White) ・Twisting : 2 Cores with Cotton fillers twisted Together ・Barrier Layer : Paper Tape Wrap ・Jacket: Ultra Flexible Pb free PVC (Light Blue) ・Max. Conductor Resistance : 0.0135 Ω/ M ・Overall Diameter : 8.9 mm (≒15 AWG)/ (1.42 sq.mm) Note: Price Per Meter, Without Termination

13AWG α(Alpha) OCC Conductor Speaker cable (2 x 2.53 sq mm) FEATURES ・α (Alpha)-OCC Conductor (7X18 pcs/0.16mm) ・Sound characteristics: Detailed, open treble, tight, deep bass, overall well-balanced sound, excellent clarity and imaging ・Made in Japan SPECIFICATIONS ・Conductor : α (Alpha)-OCC Conductor (7X18 pcs/0.16mm) ・Insulation : Special Polyethylene (Red/ White) ・Twisting : 2 Cores with Cotton fillers twisted Together ・Barrier Layer : Paper Tape Wrap ・Jacket: Ultra Flexible Pb free PVC (Dark Blue) ・Max. Conductor Resistance : 0.0078 Ω/ M ・Overall Diameter : 14.5 mm (≒13 AWG) Note: Price Per Meter, Without Termination

ASB-1 is a static eliminating brush created for audio and video applications. Featuring "COREBRID ™ B” composite core fibers, a unique highly conductive material developed by Mitsubishi Chemical Corporation. By lightly brushing the surface CDs, DVDs and LPs, the ASB-1 will remove static charge and at the same time remove any dust from the grooves of LPs. This revolutionary product solves in one simple sweep the problem of electro static noise and deteriorating sound and image quality. Use of revolutionary COREBRID ™ B (core and sheath) hybrid fibers with their amazing antistatic properties and durability has allowed us to deliver in the ASB-1, one of the most versatile and effective audio video antistatic accessories available. COREBRID ™ B is a core-sheath composite conductive acrylic hybrid fiber. The core of the fiber is formed of high-density carbon-based super conductive particles that conduct the static charge away to ground. Conventional antistatic brushes attract static charge to cling to the fibers of the brush where they can easily be discharged back onto media surfaces. With the ASB-1 static charge is conducted away through the core of the fibers, rather than on the surface for a more effective result – static is trapped and forced to ground. The surface of the COREBRID fibers is a tough abrasion resistant outer 30㎛ sheath, making them extremely durable. This allows the ASB-1 fibers to be used time and again without wear or damage to the special conductive core. And the special enlarged ends of the hybrid fibers offer dramatically increased generation of corona discharge and the most effective static elimination results seen in an antistatic brush. INSTRUCTIONS When lightly brushing lenses, screens, CDs, Blu-rays or LPs, place one finger on the metal band that holds the bristles in place, thus providing an earth, removing most electrostatic charge and improving sound and picture. APPLICATION Analog records (LPs) Optical disc (CD, DVD, Blu-ray Disc, etc.) Projector Screens Camera Lenses Other static charged devices, parts

Furutech has a long history of using innovative technology to enhance audio quality. Their top-of-the-line double-shielded α (Alpha)-OCC conductor interconnects, power cords, and digital cables, known as Furutech Reference III, are built with exceptional precision and utilize Formula GC-303 antimagnetic EMI-absorbent modules to provide superior resolution, increased dynamics, and outstanding performances from all components. Additionally, all connectors are rhodium-plated to ensure optimal signal transfer. α (Alpha) Conductor Is Composed Of Fine PCOCC Wire Strands Treated With Furutech’s α (Alpha) Cryogenic and Demagnetizing Process Features Double-shielded α (Alpha)-OCC Conductors eliminate radiated noise Formula GC-303 Antimagnetic EMI-Absorbent Modules surround each cable High performance beautifully engineered rhodium plated RCA [FP-106 (R)] Center filament pin [FP-106 (R)] a high-contact work of engineering art composed of nonmagnetic rhodium-plated phosphor bronze with Teflon dielectric RCA connector backbone composed of nonmagnetic rhodium-plated eutectic cast brass with beautifully-finished nonmagnetic brass outer locking shell. Shield 1 0.12 mm α (Alpha) conductor wire braid Shield 2 special EMI-absorbent Formula GC-303 Modules for superior noise isolation Insulated with air-foamed HDPE reducing capacitance and damping vibration Results in greater resolution, clarity, powerful dynamics, and an ultra-quiet soundstage in which music develops more fully without artificial upper-frequency “presence region” glare. GC-303 allows a deeper, tighter bass to form a solid foundation for the rest of the frequency range, better defining the original recording’s venue. Natural, unforced detail reveals nuance and energy for an engaging musical experience. FP-106(R) RCA connectors Made in Japan SPECIFICATIONS 30-strand α (Alpha)–OCC Conductor・0.18mm, 1.14mm diameter Insulation: 30％ air-foamed HDPE (Red/White) 2.60mm diameter Cable Lay: Two twisted cores with cotton yarn Cable Wrap: Non-woven fabric wrap ~5.8mm diameter Shield-1: 0.12mm braided α (Alpha) Conductor・Braid density: 80％ UP x 6.3mm diameter Sheath: Two layers flexible PVC (Dark Brown) 8.0mm diameter Shield-2: Special EMI- and noise-absorbent Formula GC-303 module Jacket: Nylon yarn braid. ~10.5mm diameter Max. Conductor Resistance 26.4 Ω／km JISC3005 6 20℃ Min. Insulation Resistance 1000 MΩ‧km JISC3005 9.1 20℃ Dielectric Strength AC. 500 V／1 min JISC3005 8 Electrostatic Capacitance Approx 42 PF／m at 1 KHz Characteristic Impedance Approx 120 Ω at 100 MHz 1.2m length

Furutech has a long history of using innovative technology to enhance audio quality. Their top-of-the-line double-shielded α (Alpha)-OCC conductor interconnects, power cords, and digital cables, known as Furutech Reference III, are built with exceptional precision and utilize Formula GC-303 antimagnetic EMI-absorbent modules to provide superior resolution, increased dynamics, and outstanding performances from all components. Additionally, all connectors are rhodium-plated to ensure optimal signal transfer. α (Alpha) Conductor Is Composed Of Fine PCOCC Wire Strands Treated With Furutech’s α (Alpha) Cryogenic and Demagnetizing Process Features Double-shielded α (Alpha)-OCC Conductors eliminate radiated noise Formula GC-303 Antimagnetic EMI-Absorbent Modules surround each cable High performance beautifully engineered rhodium plated XLR [FP-601M/602F (R)] connectors XLR pins [FP-601M (R)/602F (R)] high-contact luxuriously-finished nonmagnetic rhodium-plated phosphor bronze for stable Furutech Pure Transmission signal Shield 1 0.12 mm α (Alpha) conductor wire braid Shield 2 special EMI-absorbent Formula GC-303 Modules for superior noise isolation Insulated with air-foamed HDPE reducing capacitance and damping vibration Results in greater resolution, clarity, powerful dynamics, and an ultra-quiet soundstage in which music develops more fully without artificial upper-frequency “presence region” glare. GC-303 allows a deeper, tighter bass to form a solid foundation for the rest of the frequency range, better defining the original recording’s venue. Natural, unforced detail reveals nuance and energy for an engaging musical experience. FP-601 M(R) and FP-602 F(R) XLR connectors Made in Japan SPECIFICATIONS 30-strand α (Alpha)–OCC Conductor・0.18mm, 1.14mm diameter Insulation: 30％ air-foamed HDPE (Red/White) 2.60mm diameter Cable Lay: Two twisted cores with cotton yarn Cable Wrap: Non-woven fabric wrap ~5.8mm diameter Shield-1: 0.12mm braided α (Alpha) Conductor・Braid density: 80％ UP x 6.3mm diameter Sheath: Two layers flexible PVC (Dark Brown) 8.0mm diameter Shield-2: Special EMI- and noise-absorbent Formula GC-303 module Jacket: Nylon yarn braid. ~10.5mm diameter Max. Conductor Resistance 26.4 Ω／km JISC3005 6 20℃ Min. Insulation Resistance 1000 MΩ‧km JISC3005 9.1 20℃ Dielectric Strength AC. 500 V／1 min JISC3005 8 Electrostatic Capacitance Approx 42 PF／m at 1 KHz Characteristic Impedance Approx 120 Ω at 100 MHz 1.2m length

Furutech introduces the CF-102 NCF top-of-the-line RCA connector. This is the first Furutech high performance “signal” connector to feature Nano Crystal² Formula (NCF). This material is the cumulative result of Furutech’s 30 plus year effort to eliminate electrical and mechanical resonance from signal and power transmission in high performance audio and video applications. Offering a dramatic reduction in noise, improved imaging, and focus, and improved sound staging, the CF-102 NCF will take your listening enjoyment to the next level. Center conductor Nano Crystal² Formula (NCF) α (Alpha) OCC Rhodium-plated one-piece construction conductor injected with Furutech’s NCF material incorporated into selected Furutech products, NCF features a special crystalline material that has two 'active' properties. First, it generates negative ions that eliminate static. Second, it converts thermal energy into far infrared. Furutech combines this remarkable material with nano-sized ceramic particles and carbon powder for their additional 'piezoelectric effect' damping properties. The resulting Nano Crystal² Formula is the ultimate electrical and mechanical damping material. Created by Furutech, it is found exclusively in Furutech products. Furutech’s Two-Stage Cryogenic and Demagnetization Alpha Process Using cutting-edge technology and materials, Furutech developed a low-temperature two-stage process that significantly improves every facet of audio and video performance. The treatment begins during the manufacturing process with a deep, conditioning cryogenic freeze of all metal parts. Using high-end refrigerants -- liquid N2 or He -- Furutech achieves temperatures of between -196 to -250℃. The treated parts actually change their molecular structure at these extremes of temperature relieving internal stress. The molecules bond together more tightly, and the overall structure becomes more stable. This improves electrical conductivity and so power and signal transfer. Step two in the Alpha Process exposes these same parts to the patented Ring Demagnetization treatment. Ordinary high-power magnets used for this purpose often increase magnetic effects; they leave some areas more magnetized than others. This patented process uses controlled attenuation to remove magnetization for immediately more vivid and colorful improvements. Ring Demagnetization further enhances conductivity of all treated materials. ALL metallic parts used in Furutech products go through the Alpha Process treatment to keep all connectors, conductors, and metal parts in a perfect stress-free, stable, and highly conductive state. Features (NCF) α (Alpha) OCC Rhodium-plated one-piece construction conductor pin injected with Furutech’s ultimate anti-static and resonance damping material - NCF NCF delivers improvements in the depth and focus of the sound stage, harmonics and tonal balance. Low frequencies are cleaner, with a greater sense of definition made possible by a lowered noise floor α (Alpha) Copper Alloy Rhodium-plated Body Nonmagnetic stainless steel and silver-plated carbon fiber housing. The best of damping and insulation materials improve frequency extension and tonal balance. Conductor wire fixed by set screw Specified for cable diameters max. 11.0mm Sold by Set of 1 paired plugs Made in Japan Specifications (NCF) Dimensions: 14.0mm diameter x 54.0mm overall length Net Weight: 29.5 g approx. Tools included (2pcs): one small 1.5mm hex head screwdriver (H1.5) and one larger 2mm hex head screwdriver (H2.0) Note Too much torque when tightening of the screws may damage them. Recommended torque values for tightening the screws are as follows. Conductor wire set screw: (+) 40cNm / (-) 30cN•m Rear Housing fixing screw: 30cN•m

Furutech CF-126 Rhodium High End Performance RCA Connector is made from Copper Alloy rhodium-plated body with Fluoropolymer insulation and use (Alpha) OCC rhodium-plated center conductor. Features α (Alpha) OCC rhodium-plated center conductor α (Alpha) Copper Alloy rhodium-plated body with Fluoropolymer insulation. Carbon fiber and nonmagnetic stainless steel housing Termination method: solder Made in Japan Specifications Specified for cable diameters up to 7.3mm max. Dimensions: 13.0mm diameter x 39.3mm overall length

Furutech Spades made of copper subjected to the Alpha process and coated with a layer of rhodium. Fastening the cable with screws or soldering. The maximum diameter of the guide - 5.5 mm “One last comment has to go to the finish of the connectors … Tolerances are spot on, the stuff goes in smoothly, locks and unlocks without any undue play … There's something luxurious and silken about the Furutech connectors. Like fine Swiss watches. This stuff also routes and drapes easily. … Since it does perform to a very high standard, getting the tactile satisfaction and pride of ownership bits thrown into the bargain is worth mentioning. -- Srajan Ebaen, 6moons.com Features (NCF) α (Alpha) Pure Copper rhodium-plated one-piece center conductor NCF damping ring for the Pin is formed with a multi compound resin. This resin incorporates Liquid Crystal Polymer (LCP), nano-sized ceramic particles and carbon powder for their additional “Piezo Effect” damping properties. As well as Furutech’s NCF (Nano Crystal² Formula) which eliminates static, “interconverts” thermal, mechanical, and electrical energy and damps vibrations. NCF delivers improvements in the depth and focus of the sound stage, harmonics and tonal balance. Low frequencies are cleaner, with a greater sense of definition made possible by a lowered noise floor. Housing: Multilayer hybrid NCF carbon housing composed of an outer hard clear coat over with another layer of Hybrid NCF Silver plated 3k carbon fiber on a nonmagnetic stainless-steel Housing. The best of damping and insulation materials improve frequency extension and tonal balance. Knurling end housing End housing insulation ring α (Alpha) Nonmagnetic stainless-steel body. Special stainless-steel clamp compacts stranded wire for improved connection Aluminum color ring Conductor wire fixed by set screw or soldering. Specially designed fixed wire construction to ensure the stability of the conductor’s contact. Made in Japan Specifications (NCF) Specified for wire diameters max. 5.5mm Dimensions: 15.2mm diameter x 70.0mm overall length Net Weight: 38.8g approx. Features (Rhodium) α (Alpha) Pure Copper rhodium-plated center conductor α (Alpha) Nonmagnetic stainless steel body Carbon fiber and Nonmagnetic stainless steel housing Conductor wire fixed by screw set or soldering. Specially designed fixed wire construction to ensure the stability of the conductor’s contact. Made in Japan Specifications (Rhodium) Specified for wire diameters max. 5.5mm Dimensions: 15.2mm diameter x 70.0mm overall length

Furutech Banana Connectors are made of copper subjected to the Alpha process and coated with a layer of rhodium. Fasten the cable with screws or soldering. The maximum diameter of the guide - 5.5 mm “One last comment has to go to the finish of the connectors … Tolerances are spot on, the stuff goes in smoothly, locks and unlocks without any undue play … There's something luxurious and silken about the Furutech connectors. Like fine Swiss watches. This stuff also routes and drapes easily. … Since it does perform to a very high standard, getting the tactile satisfaction and pride of ownership bits thrown into the bargain is worth mentioning. -- Srajan Ebaen, 6moons.com Features (Rhodium) α (Alpha) Pure Copper rhodium-plated center conductor α (Alpha) Nonmagnetic stainless steel body Carbon fiber and Nonmagnetic stainless steel housing Conductor wire fixed by screw set or soldering. Specially designed fixed wire construction to ensure the stability of the conductor’s contact. Furutech special composite damping ring. Made in Japan Specifications (Rhodium) Specified for wire diameters max. 5.5mm Dimensions: 15.2mm diameter x 64.2mm overall length Features (NCF) α (Alpha) Pure Copper rhodium-plated one-piece center conductor. NCF damping ring for the Pin is formed with a multi compound resin. This resin incorporates Liquid Crystal Polymer (LCP), nano-sized ceramic particles and carbon powder for their additional “Piezo Effect” damping properties. As well as Furutech’s NCF (Nano Crystal² Formula) which eliminates static, “interconverts” thermal, mechanical, and electrical energy and damps vibrations. NCF delivers improvements in the depth and focus of the sound stage, harmonics and tonal balance. Low frequencies are cleaner, with a greater sense of definition made possible by a lowered noise floor. Housing: Multilayer hybrid NCF carbon housing composed of an outer hard clear coat over with another layer of Hybrid NCF Silver plated 3k carbon fiber on a nonmagnetic stainless-steel Housing. The best of damping and insulation materials improve frequency extension and tonal balance. Knurling end housing. End housing insulation ring. α (Alpha) Nonmagnetic stainless-steel body. Special stainless-steel clamp compacts stranded wire for improved connection. Aluminum color ring Center conductor locking set. Conductor wire fixed by set screw or soldering. Specially designed fixed wire construction to ensure the stability of the conductor’s contact. Specifications (NCF) Specified for wire diameters max. 5.5mm Dimensions: 15.2mm diameter x 60.5mm overall length Net Weight: 33.4g approx.

High End XLR Connector for High Performance Audio Interconnects Get the most out of your audio setup with the Furutech CF-602F XLR Connector. Its high performance design and construction ensures top-of-the-line signal transfer for a crystal clear listening experience. With this connector, you can trust that your interconnects will deliver the best audio quality possible. Features (NCF) Furutech introduces the CF-601M NCF top-of-the-line XLR connector. This is Furutech’s first high-performance balanced signal connector to feature Nano Crystal² Formula (NCF). This material is the cumulative result of Furutech’s 30 plus year effort to eliminate electrical and mechanical resonance from signal and power transmission in high performance audio and video applications. Offering a dramatic reduction in noise, improved imaging, and focus, and improved sound staging, the CF-601M NCF will take your listening enjoyment to the next level. Nano Crystal² Formula (NCF) Body material and injected conductor pins The CF-601M NCF features a body formed with NCF Liquid Crystal Polymer Resin. The resin incorporates nylon, fiberglass, nano-sized crystalline piezo ceramic particles, carbon powder and Furutech special “NCF” anti-resonance damping material. The same special NCF damping material is injected into the CF-601M NCF’s rhodium-plated α (Alpha) Pure copper one-piece construction conductor pins – true innovation! Incorporated into selected Furutech products, NCF features a special crystalline material that has two 'active' properties. First, it generates negative ions that eliminate static. Second, it converts thermal energy into far infrared. Furutech combines this remarkable material with nano-sized ceramic particles and carbon powder for their additional 'piezoelectric effect' damping properties. The resulting Nano Crystal² Formula is the ultimate electrical and mechanical damping material. Created by Furutech, it is found exclusively in Furutech products. Furutech’s Two-Stage Cryogenic and Demagnetization Alpha Process Using cutting-edge technology and materials, Furutech developed a low-temperature two-stage process that significantly improves every facet of audio and video performance. The treatment begins during the manufacturing process with a deep, conditioning cryogenic freeze of all metal parts. Using high-end refrigerants -- liquid N2 or He -- Furutech achieves temperatures of between -196 to -250℃. The treated parts change their molecular structure at these extremes of temperature relieving internal stress. The molecules bond together more tightly, and the overall structure becomes more stable. This improves electrical conductivity and so power and signal transfer. Step two in the Alpha Process exposes these same parts to the patented Ring Demagnetization treatment. Ordinary high-power magnets used for this purpose often increase magnetic effects; they leave some areas more magnetized than others. This patented process uses controlled attenuation to eliminate magnetization for immediately more vivid and colorful improvements. Ring Demagnetization further enhances conductivity of all treated materials. ALL metallic parts used in Furutech products go through the Alpha Process treatment to keep all connectors, conductors, and metal parts in a perfect stress-free, stable, and highly conductive state. Rhodium-plated α (Alpha) Pure copper one-piece construction conductors. Nylon, fiberglass, nano-sized crystalline piezo ceramic particles, carbon powder and Furutech special “NCF” anti-resonance damping material main body combine heat resistant NCF Liquid Crystal Polymer Resin. NCF delivers improvements in the depth and focus of the sound stage, harmonics and tonal balance. Low frequencies are cleaner, with a greater sense of definition made possible by a lowered noise floor. Housing: Multilayer hybrid NCF carbon housing composed of an outer hard clear coat over with another layer of Hybrid NCF Silver plated 3k carbon fiber on a nonmagnetic stainless-steel Housing. The best of damping and insulation materials improve frequency extension and tonal balance. Conductor wire fixed by set screw or soldering. Specified for cable diameters max. 10.0mm. Accommodates: 14AWG (2.08 sq.mm) max. stranded wire / 12AWG (3.3 sq.mm) max solid core wire. Wire diameter 2.1mm max. Made in Japan Specifications ( NCF ) Dimensions: ø18.6mm X 64.6mm overall length approx. Net Weight: 46.9g approx. Accessories: 2mm hex head screwdriver (H2.0)*1 PC, 1.27mm*50L hex head screwdriver(H1.27)*1 PC Features (Rhodium) α (Alpha) Beryllium copper and phosphor bronze Rhodium-plated Conductor Carbon fiber and nonmagnetic stainless steel housing Body: PVDF Fluoropolymer insulation Specially designed cable strain relief. Connections: Soldered Made in Japan Specifications (Rhodium) Specified for cable diameters up to 10.0mm (Standard version) Dimensions: 18.6mm ± 0.1mm diameter x 65.5mm ± 0.1mm overall length.

Furutech introduces the CF-601M NCF top-of-the-line XLR connector. This is Furutech’s first high-performance balanced signal connector to feature Nano Crystal² Formula (NCF). This material is the cumulative result of Furutech’s 30 plus year effort to eliminate electrical and mechanical resonance from signal and power transmission in high performance audio and video applications. Offering a dramatic reduction in noise, improved imaging, and focus, and improved sound staging, the CF-601M NCF will take your listening enjoyment to the next level. Nano Crystal² Formula (NCF) Body material and injected conductor pins The CF-601M NCF features a body formed with NCF Liquid Crystal Polymer Resin. The resin incorporates nylon, fiberglass, nano-sized crystalline piezo ceramic particles, carbon powder and Furutech special “NCF” anti-resonance damping material. The same special NCF damping material is injected into the CF-601M NCF’s rhodium-plated α (Alpha) Pure copper one-piece construction conductor pins – true innovation! Incorporated into selected Furutech products, NCF features a special crystalline material that has two 'active' properties. First, it generates negative ions that eliminate static. Second, it converts thermal energy into far infrared. Furutech combines this remarkable material with nano-sized ceramic particles and carbon powder for their additional 'piezoelectric effect' damping properties. The resulting Nano Crystal² Formula is the ultimate electrical and mechanical damping material. Created by Furutech, it is found exclusively in Furutech products. Furutech’s Two-Stage Cryogenic and Demagnetization Alpha Process Using cutting-edge technology and materials, Furutech developed a low-temperature two-stage process that significantly improves every facet of audio and video performance. The treatment begins during the manufacturing process with a deep, conditioning cryogenic freeze of all metal parts. Using high-end refrigerants -- liquid N2 or He -- Furutech achieves temperatures of between -196 to -250℃. The treated parts change their molecular structure at these extremes of temperature relieving internal stress. The molecules bond together more tightly, and the overall structure becomes more stable. This improves electrical conductivity and so power and signal transfer. Step two in the Alpha Process exposes these same parts to the patented Ring Demagnetization treatment. Ordinary high-power magnets used for this purpose often increase magnetic effects; they leave some areas more magnetized than others. This patented process uses controlled attenuation to eliminate magnetization for immediately more vivid and colorful improvements. Ring Demagnetization further enhances conductivity of all treated materials. ALL metallic parts used in Furutech products go through the Alpha Process treatment to keep all connectors, conductors, and metal parts in a perfect stress-free, stable, and highly conductive state. Features Rhodium-plated α (Alpha) Pure copper one-piece construction conductor pin injected with heat resistant NCF Liquid Crystal Polymer Resin. Nylon, fiberglass, nano-sized crystalline piezo ceramic particles, carbon powder and Furutech special “NCF” anti-resonance damping material main body combine heat resistant NCF Liquid Crystal Polymer Resin. NCF delivers improvements in the depth and focus of the sound stage, harmonics and tonal balance. Low frequencies are cleaner, with a greater sense of definition made possible by a lowered noise floor. Housing: Multilayer hybrid NCF carbon housing composed of an outer hard clear coat over with another layer of Hybrid NCF Silver plated 3k carbon fiber on a nonmagnetic stainless-steel Housing. The best of damping and insulation materials improve frequency extension and tonal balance. Conductor wire fixed by set screw or soldering. Specified for cable diameters max. 10.0mm. Accommodates: 14AWG (2.08 sq.mm) max. stranded wire / 12AWG (3.3 sq.mm) max solid core wire. Wire diameter 2.1mm max. Made in Japan Specifications Dimensions: ø18.6mm X 64.6mm overall length approx. Net Weight: 46.9g approx. Accessories 2mm hex head screwdriver (H2.0)*1 PC 1.27mm*50L hex head screwdriver(H1.27)*1 PC Note Too much torque when tightening of the screws may damage them. Recommended torque values for tightening the screws are as follows. Conductor wire set screws: 25cN•m (2.55kgf-cm) Housing fixing screw: 30cN•m (3.06kgf-cm) Please observe the following solder temperature and time to avoid damage to the insulation. Recommended soldering operation: Temperature: Max. 425 ℃ Approx. Time: Max. 15 secs. Approx. Caution When using the set screws to secure the conductor wire, the screw should not protrude from the screw hole and make contact with the connector housing - this could cause a short circuit.

High End XLR Connector for High Performance Audio Interconnects Get the most out of your audio setup with the Furutech CF-602F XLR Connector. Its high performance design and construction ensures top-of-the-line signal transfer for a crystal clear listening experience. With this connector, you can trust that your interconnects will deliver the best audio quality possible. Features (NCF) Furutech introduces the CF-602F NCF top-of-the-line XLR connector. This is Furutech first high-performance balanced signal connector to feature Nano Crystal² Formula (NCF). This material is the cumulative result of Furutech’s 30 plus year effort to eliminate electrical and mechanical resonance from signal and power transmission in high performance audio and video applications. Offering a dramatic reduction in noise, improved imaging, and focus, and improved sound staging, the CF-602F NCF will take your listening enjoyment to the next level. Nano Crystal² Formula (NCF) Body material and Damping clips The CF-602F NCF contacts are housed in a body formed with NCF Liquid Crystal Polymer Resin. The resin incorporates nylon, fiberglass, nano-sized crystalline piezo ceramic particles, carbon powder and Furutech special “NCF” anti-resonance damping material. The CF-602F NCF also features special NCF material damping clips of the same material. Incorporated into selected Furutech products, NCF features a special crystalline material that has two 'active' properties. First, it generates negative ions that eliminate static. Second, it converts thermal energy into far infrared. Furutech combines this remarkable material with nano-sized ceramic particles and carbon powder for their additional 'piezoelectric effect' damping properties. The resulting Nano Crystal² Formula is the ultimate electrical and mechanical damping material. Created by Furutech, it is found exclusively in Furutech products. Furutech’s Two-Stage Cryogenic and Demagnetization Alpha Process Using cutting-edge technology and materials, Furutech developed a low-temperature two-stage process that significantly improves every facet of audio and video performance. The treatment begins during the manufacturing process with a deep, conditioning cryogenic freeze of all metal parts. Using high-end refrigerants -- liquid N2 or He -- Furutech achieves temperatures of between -196 to -250℃. The treated parts change their molecular structure at these extremes of temperature relieving internal stress. The molecules bond together more tightly, and the overall structure becomes more stable. This improves electrical conductivity and so power and signal transfer. Step two in the Alpha Process exposes these same parts to the patented Ring Demagnetization treatment. Ordinary high-power magnets used for this purpose often increase magnetic effects; they leave some areas more magnetized than others. This patented process uses controlled attenuation to eliminate magnetization for immediately more vivid and colorful improvements. Ring Demagnetization further enhances conductivity of all treated materials. ALL metallic parts used in Furutech products go through the Alpha Process treatment to keep all connectors, conductors, and metal parts in a perfect stress-free, stable, and highly conductive state. Rhodium-plated α (Alpha) Pure copper one-piece construction conductors. Nylon, fiberglass, nano-sized crystalline piezo ceramic particles, carbon powder and Furutech special “NCF” anti-resonance damping material main body combine heat resistant NCF Liquid Crystal Polymer Resin. NCF delivers improvements in the depth and focus of the sound stage, harmonics and tonal balance. Low frequencies are cleaner, with a greater sense of definition made possible by a lowered noise floor. Special resonance damping composite release button – formed with stainless steel powder and vibration resistant metal powder. Chrome-plated brass stamped housing. NCF material damping clips Housing: Multilayer hybrid NCF carbon housing composed of an outer hard clear coat over with another layer of Hybrid NCF Silver plated 3k carbon fiber on a nonmagnetic stainless-steel Housing. The best of damping and insulation materials improve frequency extension and tonal balance. Conductor wire fixed by set screw or soldering. Specified for cable diameters max. 10.0mm. Accommodates: 13AWG (2.62 sq.mm) max. stranded wire / 12AWG (3.3 sq.mm) max solid core wire. Wire diameter 2.4mm max. Made in Japan Specifications ( NCF ) Dimensions: ø18.6mm X 70.85mm overall length approx. Net Weight: 58.2g approx. Accessories: 2mm hex head screwdriver (H2.0)*1 PC, 1.27mm*50L hex head screwdriver(H1.27)*1 PC Features (Rhodium) α (Alpha) Beryllium copper and phosphor bronze Rhodium-plated Conductor Carbon fiber and nonmagnetic stainless steel housing Body: PVDF Fluoropolymer insulation Specially designed cable strain relief. Connections: Soldered Made in Japan Specifications (Rhodium) Specified for cable diameters up to 10.0mm (Standard version) Dimensions: 18.6mm ± 0.1mm diameter x 77.4mm ± 0.1mm overall length.

Furutech introduces the CF-602F NCF top-of-the-line XLR connector. This is Furutech first high-performance balanced signal connector to feature Nano Crystal² Formula (NCF). This material is the cumulative result of Furutech’s 30 plus year effort to eliminate electrical and mechanical resonance from signal and power transmission in high performance audio and video applications. Offering a dramatic reduction in noise, improved imaging, and focus, and improved sound staging, the CF-602F NCF will take your listening enjoyment to the next level . Nano Crystal² Formula (NCF) Body material and injected conductor pins The CF-602F NCF contacts are housed in a body formed with NCF Liquid Crystal Polymer Resin. The resin incorporates nylon, fiberglass, nano-sized crystalline piezo ceramic particles, carbon powder and Furutech special “NCF” anti-resonance damping material. The CF-602F NCF also features special NCF material damping clips of the same material. Incorporated into selected Furutech products, NCF features a special crystalline material that has two 'active' properties. First, it generates negative ions that eliminate static. Second, it converts thermal energy into far infrared. Furutech combines this remarkable material with nano-sized ceramic particles and carbon powder for their additional 'piezoelectric effect' damping properties. The resulting Nano Crystal² Formula is the ultimate electrical and mechanical damping material. Created by Furutech, it is found exclusively in Furutech products. Furutech’s Two-Stage Cryogenic and Demagnetization Alpha Process Using cutting-edge technology and materials, Furutech developed a low-temperature two-stage process that significantly improves every facet of audio and video performance. The treatment begins during the manufacturing process with a deep, conditioning cryogenic freeze of all metal parts. Using high-end refrigerants -- liquid N2 or He -- Furutech achieves temperatures of between -196 to -250℃. The treated parts change their molecular structure at these extremes of temperature relieving internal stress. The molecules bond together more tightly, and the overall structure becomes more stable. This improves electrical conductivity and so power and signal transfer. Step two in the Alpha Process exposes these same parts to the patented Ring Demagnetization treatment. Ordinary high-power magnets used for this purpose often increase magnetic effects; they leave some areas more magnetized than others. This patented process uses controlled attenuation to eliminate magnetization for immediately more vivid and colorful improvements. Ring Demagnetization further enhances conductivity of all treated materials. ALL metallic parts used in Furutech products go through the Alpha Process treatment to keep all connectors, conductors, and metal parts in a perfect stress-free, stable, and highly conductive state. Features Rhodium-plated α (Alpha) Pure copper one-piece construction conductors. Nylon, fiberglass, nano-sized crystalline piezo ceramic particles, carbon powder and Furutech special “NCF” anti-resonance damping material main body combine heat resistant NCF Liquid Crystal Polymer Resin. NCF delivers improvements in the depth and focus of the sound stage, harmonics and tonal balance. Low frequencies are cleaner, with a greater sense of definition made possible by a lowered noise floor. Special resonance damping composite release button – formed with stainless steel powder and vibration resistant metal powder. Chrome-plated brass stamped housing. NCF material damping clips Housing: Multilayer hybrid NCF carbon housing composed of an outer hard clear coat over with another layer of Hybrid NCF Silver plated 3k carbon fiber on a nonmagnetic stainless-steel Housing. The best of damping and insulation materials improve frequency extension and tonal balance. Conductor wire fixed by set screw or soldering. Specified for cable diameters max. 10.0mm. Accommodates: 13AWG (2.62 sq.mm) max. stranded wire / 12AWG (3.3 sq.mm) max solid core wire. Wire diameter 2.4mm max. Made in Japan Specifications Dimensions: ø18.6mm X 70.85mm overall length approx. Net Weight: 58.2g approx. Accessories 2mm hex head screwdriver (H2.0)*1 PC 1.27mm*50L hex head screwdriver(H1.27)*1 PC Note Too much torque when tightening of the screws may damage them. Recommended torque values for tightening the screws are as follows. Conductor wire set screws: 25cN•m (2.55kgf-cm) Housing fixing screw: 30cN•m (3.06kgf-cm) Please observe the following solder temperature and time to avoid damage to the insulation. Recommended soldering operation: Temperature: Max. 425 ℃ Approx. Time: Max. 15 secs. Approx. Caution When using the set screws to secure the conductor wire, the screw should not protrude from the screw hole and make contact with the connector housing - this could cause a short circuit.

Featuring multi-stranded Alpha OCC-DUCC copper treated with the Alpha-processing technique, the Furutech DAS4.1 Balanced Audio Cable provides the highest caliber of analog audio connections for RCA and XLR type cables. Furutech’s α (Alpha) OCC is one of a select few of conductors that Furutech engineers have found to excel in sound reproduction. α (Alpha) OCC is made with high-purity oxygen-free copper using a special casting process. Unlike regular OFC, almost all of the impurities of this high-purity OCC have been removed at the micron level through a special casting process unique to Furutech. D.U.C.C. (Dia Ultra Crystallized Copper) α (Alpha) OCC –DUCC is constructed using a combination of DUCC Ultra Crystallized High Purity Copper and Furutech’s world famous Pure Transmission α (Alpha)-OCC. Furutech DUCC Ultra Crystallized High Purity Copper supplied and regulated with strict quality and supply control by Mitsubishi Materials Industries -- is one of the best conductors Furutech engineers have found for signal transmission. Mitsubishi process this extremely pure oxygen-free copper with new technology that optimally aligns the crystals while reducing the number of crystal-grain boundaries resulting in a tremendously efficient conductor. Furutech combines DUCC with Furutech’s world famous Pure Transmission α-OCC and treats this optimized dual conductor configuration with Furutech’s Alpha Super Cryogenic and Demagnetizing process to take purity and conductivity a significant step further. (D.U.C.C. is a registered trademark of Mitsubishi Cable Industries Ltd.) Specifications Conductor Material Alpha-OCC + α -DUCC (7N Class) Construction （ pcs ／ mm ） Inner – 59 / 0.13 α -OCC (Right rotate) Middle – 29 / 0.13 α -DUCC (Left rotate) Outer – 36 / 0.13 α -DUCC (Right rotate) Diameter （ mm ） 1.67 Approx. Size 15AWG / 1.65 Sq.mm Insulation Material Audio Grade PP (Polypropylene, Red for”+” 、 White for “-“) Mom. Thickness （ mm ） 0.47 Approx. Diameter （ mm ） 2.6 Approx. Twisting Method 2 Cores Twisted Together Fillers Polyester yarn Barrier Layer Non-Woven Fabric wrap Shield Method Cu-Foil wrap + Braided (24×6 / 0.13 α- OCC) + Paper wrap Inner Sheath Material Audio Grade Flexible PVC (Black) Nano-Ceramic / Carbon particle compound Diameter （ mm ） 7.8 Approx. Outer Sheath Material Audio Grade Flexible PVC (Dark purple) Nom. Thickness （ mm ） 0.7 Approx. Diameter （ mm ） 9.2 Approx. Outer Sleeve Material PP yarn stranded braid(Black/Blue) Overall Diameter （ mm ） 10.0 Approx. Awards & Reviews HiFi Choice Support Instructions (XLR) Instructions (RCA) Note: Price Per Meter, Without Termination

The new destat III is incredibly easy to use as it removes dust and static charge from audio/video media in just one 15 second treatment – now with 30% more zapping power. High performance enthusiasts know that static charges on analog and optical media -- LPs, CDs and DVDs – can lead to distracting noise and compromised sound. Simply place your media on the destat III or hold it over your media of choice and press one button! The powerful fan removes dust while the destat III’s Balanced Ion Flow Generator – releasing just the right balance of positive and negative ions – eliminates static. Almost every system component benefits from eliminating its static charge. Use the destat III to remove static from the audio/video equipment itself – best to turn them off during treatment – plus power cords, line-level interconnects, speaker cables, and metal record clamps! Some household items may even benefit from static charge removal. The destat III is small and efficient, powered by four AA batteries and is easily used with one hand. Each dust and static removal takes a mere 15 seconds. And there’s a safety circuit preventing shock from the Balanced Ion Flow Generator. The destat III is third generation model of Furutech’s original and well received Destat - just one of Furutech’s many treatments for analog and digital playback systems. Removes Dust and static Takes 15 seconds Safety circuit preventing shock Powered by 4 AA batteries Made in Japan

High End Performance Coaxial Digital Interconnect Cable Top of the line double-shielded α (Alpha)-OCC conductor interconnects, power cords and digital cables featuring extraordinary build quality and Formula GC-303 antimagnetic EMI-absorbent modules surrounding the cable offering greater resolution, more powerful dynamics, and virtuoso performances from all your components. All connectors are rhodium-plated for optimal signal transfer. FEATURES Double-shielded α (Alpha)-OCC Conductors eliminate radiated noise Formula GC-303 Antimagnetic EMI-Absorbent Modules surround each cable High performance beautifully engineered rhodium-plated connectors [RCA FP-106 (R)] or BNC [FP-3-117 (R)] transfer signal without reflections for extremely low jitter performance Center filament pin [FP-106 (R)] a high-contact work of engineering art composed of nonmagnetic rhodium-plated phosphor bronze with Teflon dielectric RCA connector backbone composed of nonmagnetic rhodium-plated eutectic cast copper alloy with beautifully-finished nonmagnetic copper alloy outer locking shell BNC connectors [FP-3-117 (R)] characteristic impedance 75 ± 5Ω Additionally shielded with special fiberglass and 0.12 mm α (Alpha) conductor braid Insulated with air-foamed HDPE reducing capacitance and damping vibration Results in greater resolution, clarity, powerful dynamics, and an ultra-quiet soundstage in which music develops more fully without artificial upper-frequency “presence region”glare. GC-303 allows a deeper, tighter bass to form a solid foundation for the rest of the frequency range, better defining the original recording's venue. Natural, unforced detail reveals nuance and energy for an engaging musical experience. α (Alpha) Conductor Is Composed Of Fine PCOCC Wire Strands Treated With Furutech’s α (Alpha) Cryogenic and Demagnetizing Process Made in Japan SPECIFICATIONS Construction and Materials: 37-strand α (Alpha)-OCC Conductor, 0.16mm, 1.15mm diameter Insulation-1: HDPE 1.75mm diameter Insulation-2: Air-foamed PE, 5.5mm diameter Shield-1: 0.12mm braided α (Alpha) Conductor braid density: 80％ UP x 6.3mm diameter Sheath: Two layers flexible PVC (Aquamarine) 8mm diameter Shield-2: Special fiberglass and copper wire stranded braid Jacket: Nylon yarn braid approx. 10.5mm Shield-3: Special fiberglass and copper wire stranded braid Connectors: RCA [FP-106 (R)] or BNC [FP-3-117 (R)] Max. Conductor Resistance 25 Ω／km JISC3005 6 20℃ Min. Insulation Resistance 1000 MΩ‧km JISC3005 9.1 20℃ Dielectric Strength AC. 1000 V／1 min JISC3005 8 Electrostatic Capacitance Approx 56 PF／m at 1 KHz Characteristic Impedance 75 ± 5 Ω at 10 MHz Made in Japan 1.2m length