Pylon Audio Diamond 28 - Floorstanding Speaker (Pair)
In the Pylon Diamond 28, the well known and widely appreciated 19mm Scan Speak textile dome was used, while the mids and the lows are entrusted with a pair of 18cm transducers made by Seas. By optimizing the selection of the tweeters transducers we have obtained sophisticated reproduction of high frequencies, while mid-woofers, with light cellulose membrane allow for a lot of flexibility division band in the midrange. The whole results in a dynamic, coherent and retail nature of the presentation that is differentiating recordings well.
By a slight inclination of the design the desired visual effect was achieved, and it was combined with the optimization of the dependence phase that occur between the loudspeakers. In Diamond 28 the steering is mounted on technique direct mounting, it uses only polypropylene capacitors. Placement of coils is optimized to minimize interference.
Loudspeakers enclosures are made of solid MDF, which additionaly were strengthened with inner rim. To suppress the sound bitumen mats and sheep's wool were applied. The loudspeaker was set on a pedestal, which in addition to providing aesthetic impressions, provides an anti-vibration platform for the loudspeakerspeakers set.
Diamond 28 is the unique combination of natural sounding with the look of the design.
The columns are dedicated for use in rooms with a floor area from 25 to 45 m2.
|Bandwidth||36 Hz - 20 kHz|
|Nominal power||120 W|
|Maximum power||250 W|
|Dimensions [W x H x D]||196 x 1040 x 370 mm|
|Weight||25 kg / piece|
|Woofer||2 x Pylon Audio PSW 18.8.CA (2xSeas CA18RLY)|
|Tweeter||Pylon Audio PST 19.T (Scan Speak D2010/851300)|
|Spikes + stand||Yes|
|Speaker grille||Yes, magnetic|
|Available colours||- Natural veneer OAK, ennobled with the oil-wax - 11 decors.
- Natural veneer OAK, colourless lacquer: wenge, black, walnut, cherry, natural.
- High Gloss: white HG, black HG.
- Lacquer Mat - white, black.
- We can realize individual orders with RAL colours.