Skip to content
KLH Model Five - Standmount Speaker (Pair) - The Audio Co.

KLH Model Five - Standmount Speaker (Pair)

by KLH
₹ 225,000 - ₹ 225,000
₹ 225,000
₹ 275,000
₹ 275,000 - ₹ 275,000
₹ 275,000

Taxes & Shipping Included

Finish: English Walnut

The KLH Model Five acoustic suspension standmount speaker (pair) is known as one of the finest and most sought-after speakers for audiophiles, both new and seasoned. Our updated version of this classic speaker has real wood veneers, cast aluminum baskets, and uses acoustic suspension design principles made famous by founder Henry Kloss

The legendary KLH Model Five was first introduced in 1968 and served as the heart and soul of KLH’s success throughout the late 1960’s and 1970’s. At its core was the acoustic suspension design that dominated the loudspeaker industry for decades and made the Model Five one of the best-selling loudspeakers of its era. In 2021, KLH re-introduced the Model Five; building on the original acoustic suspension design and using the most advanced loudspeaker technology available today 

Features

  • Iconic Mid-Century Modern Styling
  • Acoustic Suspension Design – The most accurate and linear enclosure design available today
  • Three-Position Acoustic Balance Control to tailor the loudspeaker’s output for the most difficult acoustic environments
  • Dedicated midrange driver to reproduce the critical mid-frequency band
  • Non-Resonant Die-Cast Aluminum Midrange & Woofer Frames
  • Die-Cast Aluminum Tweeter Faceplate
  • KLH cabinetry featuring a structurally reinforced ¾” MDF enclosure
  • Thirteen component network using high-quality iron-core inductors & Mylar capacitors
  • Each speaker includes its own 5° slant riser base made of powder coated 14-gauge steel
  • Low-profile magnet attached grille

Specifications

  • Frequency Response 42Hz – 20,000Hz +/- 3dB
  • Low Frequency Extension -10dB @ 32Hz
  • In-Room Sensitivity 90.5dB @2.83V / 1M
  • Free-field Sensitivity 87.5dB @ 2.83V / 1M
  • Power Handling 200 Watts / 800 Watts Peak
  • Recommended Amplification 20 Watts to 200 Watts
  • In-Room Maximum SPL 112.3dB
  • Impedance 6 Ohms (3.5 ohm minimum @140 Hz)
  • Horizontal Dispersion 140° Degrees
  • Features Three-Position Acoustic Balance Control
  • Crossover Frequency MF: 380Hz (2nd Order Electro-Acoustic) HF: 2,850Hz (2nd Order Electro-Acoustic)
  • High Frequency Driver 1" Aluminum Dome with Soft Rubber Suspension
  • Mid Frequency Driver 4" Pulp-Paper Cone with Reverse Roll Rubber Suspension
  • Low Frequency Driver 10" Pulp-Paper Cone with Reverse Roll Rubber Suspension, 2" Diameter Flat-Wire Voice Coil
  • Enclosure Material Structurally Reinforced ¾" Medium Density Fiberboard
  • Inputs Five-Way Gold-Plated Binding Posts
  • Height 34.25" (87.0cm) w/ Included Riser Base 26.0" (66cm) w/o Riser Base
  • Width 13.75" (35.0cm)
  • Depth 13.0" (33.0cm) w/ Included Riser Base 11.5" (29.2cm) w/o Riser Base
  • Weight 44Ibs. (20.0kg) w/o Riser Base 52Ibs. (23.6kg) w/ Included Riser Base
  • Included Accessories 5° Slant Riser Base

Support

Awards & Reviews

The KLH Model Five acoustic suspension standmount speaker (pair) is known as one of the finest and most sought-after speakers for audiophiles, both new and seasoned. Our updated version of this classic speaker has real wood veneers, cast aluminum baskets, and uses acoustic suspension design principles made famous by founder Henry Kloss

The legendary KLH Model Five was first introduced in 1968 and served as the heart and soul of KLH’s success throughout the late 1960’s and 1970’s. At its core was the acoustic suspension design that dominated the loudspeaker industry for decades and made the Model Five one of the best-selling loudspeakers of its era. In 2021, KLH re-introduced the Model Five; building on the original acoustic suspension design and using the most advanced loudspeaker technology available today 

Features

  • Iconic Mid-Century Modern Styling
  • Acoustic Suspension Design – The most accurate and linear enclosure design available today
  • Three-Position Acoustic Balance Control to tailor the loudspeaker’s output for the most difficult acoustic environments
  • Dedicated midrange driver to reproduce the critical mid-frequency band
  • Non-Resonant Die-Cast Aluminum Midrange & Woofer Frames
  • Die-Cast Aluminum Tweeter Faceplate
  • KLH cabinetry featuring a structurally reinforced ¾” MDF enclosure
  • Thirteen component network using high-quality iron-core inductors & Mylar capacitors
  • Each speaker includes its own 5° slant riser base made of powder coated 14-gauge steel
  • Low-profile magnet attached grille

Specifications

  • Frequency Response 42Hz – 20,000Hz +/- 3dB
  • Low Frequency Extension -10dB @ 32Hz
  • In-Room Sensitivity 90.5dB @2.83V / 1M
  • Free-field Sensitivity 87.5dB @ 2.83V / 1M
  • Power Handling 200 Watts / 800 Watts Peak
  • Recommended Amplification 20 Watts to 200 Watts
  • In-Room Maximum SPL 112.3dB
  • Impedance 6 Ohms (3.5 ohm minimum @140 Hz)
  • Horizontal Dispersion 140° Degrees
  • Features Three-Position Acoustic Balance Control
  • Crossover Frequency MF: 380Hz (2nd Order Electro-Acoustic) HF: 2,850Hz (2nd Order Electro-Acoustic)
  • High Frequency Driver 1" Aluminum Dome with Soft Rubber Suspension
  • Mid Frequency Driver 4" Pulp-Paper Cone with Reverse Roll Rubber Suspension
  • Low Frequency Driver 10" Pulp-Paper Cone with Reverse Roll Rubber Suspension, 2" Diameter Flat-Wire Voice Coil
  • Enclosure Material Structurally Reinforced ¾" Medium Density Fiberboard
  • Inputs Five-Way Gold-Plated Binding Posts
  • Height 34.25" (87.0cm) w/ Included Riser Base 26.0" (66cm) w/o Riser Base
  • Width 13.75" (35.0cm)
  • Depth 13.0" (33.0cm) w/ Included Riser Base 11.5" (29.2cm) w/o Riser Base
  • Weight 44Ibs. (20.0kg) w/o Riser Base 52Ibs. (23.6kg) w/ Included Riser Base
  • Included Accessories 5° Slant Riser Base

Support

Awards & Reviews