Skip to content
Fyne Audio F302iC - 8inch Ceiling Speaker - The Audio Co.

Fyne Audio F302iC - 8inch Ceiling Speaker

by Fyne
₹ 27,900 - ₹ 27,900
₹ 27,900
₹ 27,900
₹ 27,900 - ₹ 27,900
₹ 27,900

Taxes & Shipping Included

The potent 200mm (8”) multi-fibre bass / midrange driver and 25mm soft dome polyester tweeter, the FA302iC is a home installation powerhouse.

High power handling, bass down to below 40Hz and adjustable tweeter pod to direct the sound give this model audiophile quality performance. Derived from Fyne’s larger F300 series models, the FA302iC feature the FyneFlute roll surround for improved bass detail and a high specification crossover tuned to get the very best from in-ceiling or in-wall position.

Easy to fit clamps, spring cable terminals and a cut-out template make for easy custom install, and the round low profile magnetic grille (square grille available as optional extra) sits almost flush to the surface.

The grille can be painted, enabling you to blend in or contrast with a wide variety of décor and room colours.

 

    SPECIFICATIONS

    System Type 2 way co-axial loudspeaker for in ceiling or in wall application, steerable HF unit
    Recommended amplifier power (Watt RMS) 25 - 120
    Peak power handling (Watt) 240
    Continuous power handling (Watt RMS) 60
    Sensitivity (2.83 Volt @ 1m) 90dB
    Nominal impedance 8 Ohm
    Frequency response (-6dB typical in room) 37Hz - 28kHz
    Drive unit complement 1 x 200mm multi-fibre bass / midrange cone, FyneFlute surround with 25mm Co-axial polyester dome tweeter
    Crossover frequency 2.8kHz
    Crossover type Passive 2nd order low pass, 1st order high pass
    Dimensions - Dia x Depth 273 x 115mm (10.7 x 4.5”)
    Square grille dimensions 281 x 281mm (11.1 x 11.1”)
    Round grille diameter 281mm (11.1”)
    Cut-out diameter 248mm (9.8”)
    Depth behind mounting surface 112.5mm (4.4”)
    Clamp travel 5 - 50mm (0.2 - 2.0”)
    Suggested min volume 15 L
    Weight - Each 2.1kg (4.7lbs)

    The potent 200mm (8”) multi-fibre bass / midrange driver and 25mm soft dome polyester tweeter, the FA302iC is a home installation powerhouse.

    High power handling, bass down to below 40Hz and adjustable tweeter pod to direct the sound give this model audiophile quality performance. Derived from Fyne’s larger F300 series models, the FA302iC feature the FyneFlute roll surround for improved bass detail and a high specification crossover tuned to get the very best from in-ceiling or in-wall position.

    Easy to fit clamps, spring cable terminals and a cut-out template make for easy custom install, and the round low profile magnetic grille (square grille available as optional extra) sits almost flush to the surface.

    The grille can be painted, enabling you to blend in or contrast with a wide variety of décor and room colours.

     

      SPECIFICATIONS

      System Type 2 way co-axial loudspeaker for in ceiling or in wall application, steerable HF unit
      Recommended amplifier power (Watt RMS) 25 - 120
      Peak power handling (Watt) 240
      Continuous power handling (Watt RMS) 60
      Sensitivity (2.83 Volt @ 1m) 90dB
      Nominal impedance 8 Ohm
      Frequency response (-6dB typical in room) 37Hz - 28kHz
      Drive unit complement 1 x 200mm multi-fibre bass / midrange cone, FyneFlute surround with 25mm Co-axial polyester dome tweeter
      Crossover frequency 2.8kHz
      Crossover type Passive 2nd order low pass, 1st order high pass
      Dimensions - Dia x Depth 273 x 115mm (10.7 x 4.5”)
      Square grille dimensions 281 x 281mm (11.1 x 11.1”)
      Round grille diameter 281mm (11.1”)
      Cut-out diameter 248mm (9.8”)
      Depth behind mounting surface 112.5mm (4.4”)
      Clamp travel 5 - 50mm (0.2 - 2.0”)
      Suggested min volume 15 L
      Weight - Each 2.1kg (4.7lbs)