Canor Hyperion P1 Vacuum Tube Preamplifier
Taxes & Shipping Included
The Canor Hyperion P1 represents the pinnacle of the brand's preamplifier engineering—a meticulously crafted vacuum tube design operating in pure Class A configuration without feedback circuitry. This reference-grade component embodies CANOR's commitment to sonic purity and analog signal integrity, delivering the transparent, detailed amplification that discerning audiophiles demand from a true flagship preamp.
Accurate Balanced Attenuator
The 64-steps balanced attenuator provides gain control in 1 dB increments, with a minimum attenuation of 63 dB and it is located in a special aluminium box (10mm thick walls) which provides perfect shielding.
The anti-vibrations
The attenuator, as well as the electronic part, are installed on anti-vibration pads (columns) which contributes to the overall elimination of vibrations.
Zero Global Feedback
The Hyperion P1 is a Class-A preamplifier and was designed to avoid ANY global feedback
Interference elimination
The analogue part is separated from the power part by a solid aluminium wall (10 mm thick) which contributes to the elimination of interference
The attenuator control
The attenuator controls are galvanically separated via optical drivers.
CMT™ technology
The Hyperion P1 utilizes our advanced CMT™ technology (CANOR® PCB Milling Technology) for optimal performance. The CMT™ technology allows us to get the dielectric loss factors (loss tangent) of PCB close to the loss factor of air. Thanks to this technology we managed to get repeatedly to the parameter level of the so-called "wire-to-wire connections"
Features
- The attenuator is located in a special aluminium box (10 mm thick walls) which provides perfect shielding and thanks to the special design, it also absorbs the vibrations.
- The Hyperion P1 is a Class-A preamplifier and was designed to avoid ANY global feedback.
- The attenuator, as well as the electronic part, is installed on anti-vibration pads (columns), which contribute to the overall elimination of vibrations.
- The analog part is separated from the power part by a solid aluminum wall (10 mm thick), which contributes to the elimination of interference.
- The attenuator control is galvanically separated via optical drivers.
- Made in Slovakia
Specifications
| Preamplifier class | A |
| Gain (XLR OUT) | 11 dB |
| Output impedance | < 150 Ω |
| Frequency response | 10 - 80 000 Hz ± 0,1 dB |
| Input impedance | 30 kΩ |
| Inputs | 4 x XLR, 5 x RCA (One pair selectable as FIX.OUT) |
| Outputs | 2 x XLR, 1 x RCA |
| Total Harmonic Distortion | < 0,005% (1 kHz, 2 V RMS) XLR < 0,3 % (1 kHz, 49 V RMS) XLR |
| Channel separation | > 110 dB |
| Signal-to-noise ratio | > 115 dB (20 Hz - 80 kHz) |
| Tube complement | 4x 6922, 2x 6H30PI |
| Power | 230 V / 50-60 Hz / 180 VA |
| Dimensions (w x h x d) | 450 x 190 x 465 mm |
| Weight (net) | 29 kg |