Skip to content
Audio Technica AT-VM95E Dual Moving Magnet Cartridge - Phono Cartridge

Audio Technica AT-VM95E Dual Moving Magnet Cartridge

by Audio Technica
₹ 4,090 - ₹ 4,090
₹ 4,090
₹ 4,090
₹ 4,090 - ₹ 4,090
₹ 4,090

Taxes & Shipping Included

This Audio Technica VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Specifications

    Frequency Response 20 - 22,000 Hz
    Channel Separation 20 dB (1 kHz)
    Vertical Tracking Angle 23°
    Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
    Stylus Construction Bonded Round Shank
    Recommended Load Impedance 47,000 Ω
    Coil Impedance 3.3 kΩ (1 kHz)
    DC Resistance 485 Ω
    Coil Inductance 550 mH (1 kHz)
    Output Voltage 4.0 mV (@ 1 kHz, 5 cm/sec)
    Output Channel Balance 2.0 dB (1 kHz)
    Stylus Shape Elliptical
    Cantilever Aluminium Pipe
    Static Compliance 17 x 10 – 6 cm / dyne
    Dynamic Compliance 7 x 10 – 6 cm / dyne (100 Hz)
    Mounting 1/2” centres
    Cartridge Weight 6.1g
    Dimensions 17.2 x 18.9 x 28.3 ( H x W x D mm)
    Accessories Included Two 11 mm installation screws;
    Two 8 mm installation screws;
    Two washers
    Model AT-VM95E
    Recommended Load Capacitance 100-200 pF
    Replacement Stylus AT-VMN95E
    Stylus Size 0.3 x 0.7 mil
    Type VM Stereo Dual Magnet
    Wire Used for Coil T.P. Copper

    This Audio Technica VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.


      Frequency Response 20 - 22,000 Hz
      Channel Separation 20 dB (1 kHz)
      Vertical Tracking Angle 23°
      Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
      Stylus Construction Bonded Round Shank
      Recommended Load Impedance 47,000 Ω
      Coil Impedance 3.3 kΩ (1 kHz)
      DC Resistance 485 Ω
      Coil Inductance 550 mH (1 kHz)
      Output Voltage 4.0 mV (@ 1 kHz, 5 cm/sec)
      Output Channel Balance 2.0 dB (1 kHz)
      Stylus Shape Elliptical
      Cantilever Aluminium Pipe
      Static Compliance 17 x 10 – 6 cm / dyne
      Dynamic Compliance 7 x 10 – 6 cm / dyne (100 Hz)
      Mounting 1/2” centres
      Cartridge Weight 6.1g
      Dimensions 17.2 x 18.9 x 28.3 ( H x W x D mm)
      Accessories Included Two 11 mm installation screws;
      Two 8 mm installation screws;
      Two washers
      Model AT-VM95E
      Recommended Load Capacitance 100-200 pF
      Replacement Stylus AT-VMN95E
      Stylus Size 0.3 x 0.7 mil
      Type VM Stereo Dual Magnet
      Wire Used for Coil T.P. Copper