Skip to content

Audio Technica AT-OC9XEN Dual Moving Coil Cartridge

Original price ₹ 34,920 - Original price ₹ 34,920
Original price ₹ 34,920
₹ 34,920
₹ 34,920 - ₹ 34,920
Current price ₹ 34,920

Taxes & Shipping Included

This Audio Technica AT-OC9XEN Dual Moving Coil cartridge with nude elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion.

Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and pure iron yoke that increase the magnetic energy, and the low-mass nude elliptical stylus on an aluminum cantilever that accurately tracks the record groove. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.

Features
    • Dual moving coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
    • The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
    • The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
    • Features low mass nude elliptical stylus and aluminum cantilever
    • A neodymium magnet and pure iron yoke provide increased magnetic energy
    • Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
    • Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
    Specifications
    Frequency Response 20-30,000 Hz
    Channel Separation 25 dB (1 kHz)
    Vertical Tracking Angle 20°
    Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
    Stylus Construction Nude square shank
    Recommended Load Impedance Min. 100 ohms (when head amplifier is connected)
    Coil Impedance 12 ohms (1 kHz)
    DC Resistance 12 ohms
    Coil Inductance 25 mH (1 kHz)
    Output Voltage 0.35 mV (at 1 kHz, 5 cm/sec)
    Output Channel Balance 1.5 dB (1 kHz)
    Stylus Shape Elliptical nude
    Cantilever Aluminum pipe
    Static Compliance 20 x 10-6 cm/dyne
    Dynamic Compliance 9 x 10-6 cm/dyne (100 Hz)
    Mounting Half-inch
    Cartridge Weight 7.6 g
    Dimensions 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
    Accessories Included Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
    Body Material Aluminum
    Model AT-OC9XEN
    Mounting Feature Half-inch mount
    Stylus Curvature Radius 0.3 x 0.7 mil
    Stylus Size Nude square shank
    Terminal Pins Brass
    Type Dual Moving Coil
    Weight 7.6 g (0.3 oz)
    Wire Used for Coil PCOCC
    Notes Mounting Feature: Threaded body Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.

     

    Support

    This Audio Technica AT-OC9XEN Dual Moving Coil cartridge with nude elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion.

    Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and pure iron yoke that increase the magnetic energy, and the low-mass nude elliptical stylus on an aluminum cantilever that accurately tracks the record groove. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.

      • Dual moving coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
      • The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
      • The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
      • Features low mass nude elliptical stylus and aluminum cantilever
      • A neodymium magnet and pure iron yoke provide increased magnetic energy
      • Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
      • Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
      Frequency Response 20-30,000 Hz
      Channel Separation 25 dB (1 kHz)
      Vertical Tracking Angle 20°
      Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
      Stylus Construction Nude square shank
      Recommended Load Impedance Min. 100 ohms (when head amplifier is connected)
      Coil Impedance 12 ohms (1 kHz)
      DC Resistance 12 ohms
      Coil Inductance 25 mH (1 kHz)
      Output Voltage 0.35 mV (at 1 kHz, 5 cm/sec)
      Output Channel Balance 1.5 dB (1 kHz)
      Stylus Shape Elliptical nude
      Cantilever Aluminum pipe
      Static Compliance 20 x 10-6 cm/dyne
      Dynamic Compliance 9 x 10-6 cm/dyne (100 Hz)
      Mounting Half-inch
      Cartridge Weight 7.6 g
      Dimensions 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
      Accessories Included Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
      Body Material Aluminum
      Model AT-OC9XEN
      Mounting Feature Half-inch mount
      Stylus Curvature Radius 0.3 x 0.7 mil
      Stylus Size Nude square shank
      Terminal Pins Brass
      Type Dual Moving Coil
      Weight 7.6 g (0.3 oz)
      Wire Used for Coil PCOCC
      Notes Mounting Feature: Threaded body Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.