Skip to content
Audio Technica AT-LP7 Fully Manual Belt-Drive Turntable - Turntable

Audio Technica AT-LP7 Fully Manual Belt-Drive Turntable

by Audio Technica
Sold out
₹ 90,000 - ₹ 90,000
₹ 90,000
₹ 90,000
₹ 90,000 - ₹ 90,000
₹ 90,000

Taxes & Shipping Included

Audio-Technica began in 1962 as a designer and manufacturer of high-end phonograph cartridges, bringing to the audio world the innovative Dual Moving Magnet stereo cartridge with its outstanding channel separation, extended frequency response and superb tracking. The AT-LP7 builds on this heritage.

We got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.

Features
      • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
      • Motor features a speed-sensor system to maintain accurate platter rotation speed
      • VM520EB Dual Moving Magnet Cartridge provides outstanding channel separation and extended frequency response, and allows for easy replacement with any VM stylus
      • J-shaped tone arm features a metallic gimbal suspension system and precision bearings for excellent tracking
      • Built-in switchable phono pre-amplifier with selectable modes for moving magnet or moving coil cartridges
      • 20 mm-thick, anti-resonance, polyoxymethylene platter
      • 40 mm-thick MDF (medium density fiberboard) chassis
      • Lightweight AT-HS10 headshell
      • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, and dust cover
      Specifications
      Type 2-speed, fully manual operation
      Motor DC motor
      Drive Method Belt drive
      Speeds 33-1/3 RPM, 45 RPM
      Turntable Platter Polyoxymethylene
      Wow and Flutter <0.08% WRMS (33 RPM) at 3 kHz
      Signal-to-Noise Ratio >60 dB
      Output Level Pre-amp “PHONO”: 4.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE (MM)”: 280 mV nominal at 1 kHz, 5 cm/sec
      Phono Pre-Amp Gain MM: 36 dB nominal, RIAA equalized MC: 56 dB nominal, RIAA equalized
      Power Supply Requirements 100 to 240 V AC, 50/60 Hz, 0.6 A max.
      Dimensions 450.0 mm (17.72") W x 352.0 mm (13.86") D x 157.0 mm (6.18") H
      Weight 8.3 kg (18.30 lbs.), without dust cover
      Accessories Included VM520EB Dual Moving Magnet stereo cartridge with replaceable stylus; AT-HS10 lightweight headshell; power cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; dust cover
      Replacement Cartridge VM520EB
      Notes Tonearm Specifications Type: Static balanced J-shaped tonearm Effective length: 247 mm Overhang: 17 mm Maximum tracking error angle: Less than 2.5° Stylus pressure adjustment range: 0 to 2.5 g Applicable cartridge weight range (including headshell): 15 to 20 g

       

      Support
      Description

      Audio-Technica began in 1962 as a designer and manufacturer of high-end phonograph cartridges, bringing to the audio world the innovative Dual Moving Magnet stereo cartridge with its outstanding channel separation, extended frequency response and superb tracking. The AT-LP7 builds on this heritage.

      We got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.
      Features
          • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
          • Motor features a speed-sensor system to maintain accurate platter rotation speed
          • VM520EB Dual Moving Magnet Cartridge provides outstanding channel separation and extended frequency response, and allows for easy replacement with any VM stylus
          • J-shaped tone arm features a metallic gimbal suspension system and precision bearings for excellent tracking
          • Built-in switchable phono pre-amplifier with selectable modes for moving magnet or moving coil cartridges
          • 20 mm-thick, anti-resonance, polyoxymethylene platter
          • 40 mm-thick MDF (medium density fiberboard) chassis
          • Lightweight AT-HS10 headshell
          • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, and dust cover
          Specifications
          Type 2-speed, fully manual operation
          Motor DC motor
          Drive Method Belt drive
          Speeds 33-1/3 RPM, 45 RPM
          Turntable Platter Polyoxymethylene
          Wow and Flutter <0.08% WRMS (33 RPM) at 3 kHz
          Signal-to-Noise Ratio >60 dB
          Output Level Pre-amp “PHONO”: 4.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE (MM)”: 280 mV nominal at 1 kHz, 5 cm/sec
          Phono Pre-Amp Gain MM: 36 dB nominal, RIAA equalized MC: 56 dB nominal, RIAA equalized
          Power Supply Requirements 100 to 240 V AC, 50/60 Hz, 0.6 A max.
          Dimensions 450.0 mm (17.72") W x 352.0 mm (13.86") D x 157.0 mm (6.18") H
          Weight 8.3 kg (18.30 lbs.), without dust cover
          Accessories Included VM520EB Dual Moving Magnet stereo cartridge with replaceable stylus; AT-HS10 lightweight headshell; power cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; dust cover
          Replacement Cartridge VM520EB
          Notes Tonearm Specifications Type: Static balanced J-shaped tonearm Effective length: 247 mm Overhang: 17 mm Maximum tracking error angle: Less than 2.5° Stylus pressure adjustment range: 0 to 2.5 g Applicable cartridge weight range (including headshell): 15 to 20 g

           

          Support