Skip to content
AIYIMA T3 Pro Phono Preamplifier

AIYIMA T3 Pro Phono Preamplifier

by AIYIMA
₹ 11,990 - ₹ 11,990
₹ 11,990
₹ 11,990
₹ 11,990 - ₹ 11,990
₹ 11,990

Taxes & Shipping Included

The AIYIMA T3 Pro is a highly versatile and budget-friendly MM/MC phono preamplifier designed to bridge the gap between your vinyl turntable and home audio setup. It stands out in the budget audiophile market by offering premium features typically reserved for higher-end gear, including customizable MC impedance loading, a built-in subsonic filter, and a front-panel gain control knob. Featuring a swappable dual op-amp architecture, it allows vinyl enthusiasts to easily fine-tune and "roll" the internal hardware to achieve their perfect custom sound signature.

The AIYIMA T3 Pro is a standalone, budget-friendly MM/MC phono preamplifier designed to elevate vinyl playback for home audio setups. Selling for roughly $99 USD, it functions as a critical bridge between a turntable and active speakers, an integrated amplifier, or a power amplifier. Unlike standard budget phono stages that offer basic plug-and-play operation, the T3 Pro is heavily geared toward audiophile customization and hardware tuning, providing a suite of physical controls that allow users to precisely match the preamp to their specific phono cartridge.

The device is built inside a compact, shielded aluminum chassis to minimize external electromagnetic interference. Internally, it relies on a multi-stage amplification design featuring four dual operational amplifiers—specifically two NE5532 and two JRC2068 chips. A primary selling point for DIY audio enthusiasts is its socketed circuit board design, which supports op-amp rolling. This allows users to easily pull out the stock chips and swap them for higher-end alternatives (like the Muses02 or OPA2134) to subtly alter the soundstage, warmth, and instrument separation without needing a soldering iron.

The physical interface of the T3 Pro provides granular control over the analog signal path:
  • Front-Panel Gain Knob: Unlike fixed-gain preamps, it features a tactile dial on the front that allows users to adjust the output level (0 to 39 dB). This is particularly useful for matching the volume of a turntable to other digital line-level sources (like a CD player or DAC) or for directly driving a pair of powered studio monitors without a separate preamplifier.
  • Bottom-Panel MC Dip Switches: For Moving Coil (MC) cartridge users, the bottom of the unit features a bank of small dip switches. These offer eight selectable impedance loading options ranging from 75Ω up to 8200kΩ. This precise impedance matching prevents high-frequency roll-off and ensures the cartridge tracks with optimal tonal balance.
  • Subsonic Filter: Also located on the underside is a toggle for a high-pass subsonic filter. When activated, it cuts out ultra-low frequency feedback (typically below 20Hz) caused by warped vinyl or mechanical turntable rumble. This protects speaker woofers from unnecessary, power-wasting excursions without affecting audible bass frequencies.
The rear panel is streamlined for low-noise analog performance. It includes a dedicated pair of gold-plated RCA phono inputs, a ground lug terminal to eliminate grounding hum, and a pair of RCA line-level outputs. The unit is powered by an external 12V AC power supply, keeping the AC-to-DC conversion noise completely isolated from the sensitive phono-stage circuitry.

Features 
  • Dual Cartridge Support: Accommodates both Moving Magnet (MM) and Moving Coil (MC) turntable cartridges via a manual switch.
  • Selectable MC Impedance: Features 8 bottom-panel dip switches to adjust impedance loading (from 75Ω to 8200kΩ), allowing you to precisely match your specific MC cartridge requirements.
  • Front Gain Control: Equips a tactile front-panel dial to adjust signal gain from 0 to 39 dB, making it easy to balance volume levels across different audio sources or drive active speakers directly.
  • Subsonic Filter: Includes a toggleable high-pass filter on the bottom panel to eliminate ultra-low frequency rumble (below 20Hz) caused by warped vinyl records, protecting your woofers from strain.
  • Op-Amp Rolling Design: Utilizes pluggable IC sockets on the circuit board, allowing DIY enthusiasts to swap out the factory operational amplifiers to customize the sound signature.
  • Four-Op-Amp Circuit: Comes stock with an internal architecture powered by two NE5532 and two JRC2068 dual operational amplifiers for low-noise signal processing.
  • Isolated Power Path: Runs on an external 12V AC power supply, keeping internal alternating current conversion hum far away from the sensitive phono audio path.
  • Gold-Plated RCA Inputs: Dedicated low-resistance phono input ports designed to securely receive delicate analog signals from the turntable.
  • RCA Line Outputs: Fixed/variable line-level outputs ready to connect directly to integrated home amplifiers, receivers, or powered studio monitors.
  • Grounding Post: Features a dedicated ground lug terminal to anchor your turntable’s ground wire and completely eliminate electrical ground hum loop noise.
  • Aluminum Shielding: Encased in a compact, rigid aluminum alloy chassis that acts as a shield against external electromagnetic and radio frequency interference (EMI/RFI).
Specifications
  • Chipset: NE5532+JAR2608
  • Replaceable chips: OPA2604, OPA2134, LM4562, JRC5532, etc.
  • Frequency response: refer to RIAA characteristics ±3dB
  • Distortion: 0.02%
  • Signal-to-noise ratio: ≥76dB
  • Output level: 5mV (MM mode)0.5mV (MC mode)
  • Maximum output amplitude: 450mV
  • Input mode: MM/MC Phono
  • Supported equipment: MM/MC singing and playing
  • Output mode: active speaker, power amplifier + passive speaker
  • Working power supply: AC12V 1.5A
  • Size: 120*104*32mm
  • Product net weight: 425g
  • Including packaging weight: 800g
Includes
  • 1 x T3 Pro Phono Preamp
  • 1 x Power Adapter
  • 1 x User Manual 
Support
About

AIYIMA stands as a celebrated pioneer in the modern audiophile landscape, renowned for making genuine, high-fidelity sound accessible to music lovers worldwide. By seamlessly blending cutting-edge engineering—such as high-performance Texas Instruments amplification chips and premium internal capacitors—with compact, elegant desktop designs, the brand has revolutionized the budget audio market. Highly praised by audio enthusiasts and reviewers alike, AIYIMA components deliver an incredibly clean, powerful, and detailed acoustic performance that consistently punches far above their price point, proving that breathtaking sonic clarity and premium build quality do not require a luxury budget.

Description

The AIYIMA T3 Pro is a highly versatile and budget-friendly MM/MC phono preamplifier designed to bridge the gap between your vinyl turntable and home audio setup. It stands out in the budget audiophile market by offering premium features typically reserved for higher-end gear, including customizable MC impedance loading, a built-in subsonic filter, and a front-panel gain control knob. Featuring a swappable dual op-amp architecture, it allows vinyl enthusiasts to easily fine-tune and "roll" the internal hardware to achieve their perfect custom sound signature.

The AIYIMA T3 Pro is a standalone, budget-friendly MM/MC phono preamplifier designed to elevate vinyl playback for home audio setups. Selling for roughly $99 USD, it functions as a critical bridge between a turntable and active speakers, an integrated amplifier, or a power amplifier. Unlike standard budget phono stages that offer basic plug-and-play operation, the T3 Pro is heavily geared toward audiophile customization and hardware tuning, providing a suite of physical controls that allow users to precisely match the preamp to their specific phono cartridge.
The device is built inside a compact, shielded aluminum chassis to minimize external electromagnetic interference. Internally, it relies on a multi-stage amplification design featuring four dual operational amplifiers—specifically two NE5532 and two JRC2068 chips. A primary selling point for DIY audio enthusiasts is its socketed circuit board design, which supports op-amp rolling. This allows users to easily pull out the stock chips and swap them for higher-end alternatives (like the Muses02 or OPA2134) to subtly alter the soundstage, warmth, and instrument separation without needing a soldering iron.
The physical interface of the T3 Pro provides granular control over the analog signal path:
  • Front-Panel Gain Knob: Unlike fixed-gain preamps, it features a tactile dial on the front that allows users to adjust the output level (0 to 39 dB). This is particularly useful for matching the volume of a turntable to other digital line-level sources (like a CD player or DAC) or for directly driving a pair of powered studio monitors without a separate preamplifier.
  • Bottom-Panel MC Dip Switches: For Moving Coil (MC) cartridge users, the bottom of the unit features a bank of small dip switches. These offer eight selectable impedance loading options ranging from 75Ω up to 8200kΩ. This precise impedance matching prevents high-frequency roll-off and ensures the cartridge tracks with optimal tonal balance.
  • Subsonic Filter: Also located on the underside is a toggle for a high-pass subsonic filter. When activated, it cuts out ultra-low frequency feedback (typically below 20Hz) caused by warped vinyl or mechanical turntable rumble. This protects speaker woofers from unnecessary, power-wasting excursions without affecting audible bass frequencies.
The rear panel is streamlined for low-noise analog performance. It includes a dedicated pair of gold-plated RCA phono inputs, a ground lug terminal to eliminate grounding hum, and a pair of RCA line-level outputs. The unit is powered by an external 12V AC power supply, keeping the AC-to-DC conversion noise completely isolated from the sensitive phono-stage circuitry.
Features 
  • Dual Cartridge Support: Accommodates both Moving Magnet (MM) and Moving Coil (MC) turntable cartridges via a manual switch.
  • Selectable MC Impedance: Features 8 bottom-panel dip switches to adjust impedance loading (from 75Ω to 8200kΩ), allowing you to precisely match your specific MC cartridge requirements.
  • Front Gain Control: Equips a tactile front-panel dial to adjust signal gain from 0 to 39 dB, making it easy to balance volume levels across different audio sources or drive active speakers directly.
  • Subsonic Filter: Includes a toggleable high-pass filter on the bottom panel to eliminate ultra-low frequency rumble (below 20Hz) caused by warped vinyl records, protecting your woofers from strain.
  • Op-Amp Rolling Design: Utilizes pluggable IC sockets on the circuit board, allowing DIY enthusiasts to swap out the factory operational amplifiers to customize the sound signature.
  • Four-Op-Amp Circuit: Comes stock with an internal architecture powered by two NE5532 and two JRC2068 dual operational amplifiers for low-noise signal processing.
  • Isolated Power Path: Runs on an external 12V AC power supply, keeping internal alternating current conversion hum far away from the sensitive phono audio path.
  • Gold-Plated RCA Inputs: Dedicated low-resistance phono input ports designed to securely receive delicate analog signals from the turntable.
  • RCA Line Outputs: Fixed/variable line-level outputs ready to connect directly to integrated home amplifiers, receivers, or powered studio monitors.
  • Grounding Post: Features a dedicated ground lug terminal to anchor your turntable’s ground wire and completely eliminate electrical ground hum loop noise.
  • Aluminum Shielding: Encased in a compact, rigid aluminum alloy chassis that acts as a shield against external electromagnetic and radio frequency interference (EMI/RFI).
Specifications
  • Chipset: NE5532+JAR2608
  • Replaceable chips: OPA2604, OPA2134, LM4562, JRC5532, etc.
  • Frequency response: refer to RIAA characteristics ±3dB
  • Distortion: 0.02%
  • Signal-to-noise ratio: ≥76dB
  • Output level: 5mV (MM mode)0.5mV (MC mode)
  • Maximum output amplitude: 450mV
  • Input mode: MM/MC Phono
  • Supported equipment: MM/MC singing and playing
  • Output mode: active speaker, power amplifier + passive speaker
  • Working power supply: AC12V 1.5A
  • Size: 120*104*32mm
  • Product net weight: 425g
  • Including packaging weight: 800g
Includes
  • 1 x T3 Pro Phono Preamp
  • 1 x Power Adapter
  • 1 x User Manual 
Support
About

AIYIMA stands as a celebrated pioneer in the modern audiophile landscape, renowned for making genuine, high-fidelity sound accessible to music lovers worldwide. By seamlessly blending cutting-edge engineering—such as high-performance Texas Instruments amplification chips and premium internal capacitors—with compact, elegant desktop designs, the brand has revolutionized the budget audio market. Highly praised by audio enthusiasts and reviewers alike, AIYIMA components deliver an incredibly clean, powerful, and detailed acoustic performance that consistently punches far above their price point, proving that breathtaking sonic clarity and premium build quality do not require a luxury budget.