Skip to content

Home Speakers

Speakers for your Home

Whether its Stereo, Home Theatre or MultiRoom no home audio experience is complete without speakers of some kind. We have curated a wide variety of speakers for all conceivable applications. From entry level, value for money bookshelf speakers to state-of-the-art flagship towers, we have it all. 

You can use our filters to narrow done by Brands, Features, Price and Application. Choose from a wide range of Sound Bars, In Ceiling, On Wall, Floorstanding Towers, Bookshelves and other type of speakers. 

Of course, we are a click away and an expert from our team will be glad to assist you should you need our assistance. 

  • Magnepan .7 - Floorstanding Planar Magnetic Speaker (Pair)

    Magnepan
    ₹ 285,000
    The .7 - High-End Audio where space is at a premium. We heard you - “The 1.7 is too big for my small room.” So, we down-sized the 1.7 and called it the “.7”. It was that simple. Most all of what you read about the 1.7 applies to the .7. Ok, not everything. Because the .7 has a smaller bass diaphragm, it has less “bite on the air.” Consequently, the bass will be less than the 1.7 if you wish to use it in a larger room. However, the DWM Bass Panel can be used to supplement the bass. The .7 offers full-range, quasi-ribbon technology at a price that some audiophiles spend for speaker cables. Value is what Magneplanars are all about. The .7 has an optional oval base as shown below for modern decors. For those that have followed the “i” upgrades of the 3.7 and 1.7, the improvements of the 3.7i and 1.7i were incorporated into the .7. The .7 was subjected to “blind testing” by a panel of audiophiles and casual listeners. In addition to better sound, there is one more important improvement that you can test for yourself. If you have the opportunity to hear the .7s at your local dealer, try this experiment—Ask the dealer to place the speakers with the tweeters on the outside. Note how the imaging remains remarkably stable when seated far off-axis. With some speakers it is necessary to sit in the “sweet spot” for good imaging. If you are too far out of the sweet spot, you will hear predominately one speaker. With the tweeters on the outside, the .7 has the widest sweet spot of any of any previous Maggies. If you prefer to sit only in the “sweet spot”, try the tweeters on the inside. Be sure the speakers are toed-in. In all cases, the tweeter should not be closer to the listener than the bass section. What is a ribbon speaker? Ribbon and electrostatic speakers are elegant and simple. The air is moved and sound waves are created by moving an ultra-light film or aluminum ribbon. Ultra-low mass enables the ribbon to respond quickly to the electrical signal from the amplifier. What you hear is higher definition. For a more detailed explanation see Magneplanar technology Specifications Description 2-Way/Quasi Ribbon Freq. Resp. 45-22kHz ±3dB Sensitivity 86dB/500Hz /2.83v Impedance 4 Ω Dimensions 15¼ w x 54¼ H x 1¼ D inches Options Finish (Wood) Natural or black solid oak, dark cherry / (Aluminum) Silver or black. Fabric options Off-white / Black / Dark grey Reviews & Awards The Absolute Sound HiFi Report
    ₹ 285,000
  • Sonus Faber Lumina III - Floorstanding Speaker

    Sonus Faber
    ₹ 285,900
    Lumina collection is the new Sonus faber line conceived on the notion that it is important to savor time for ourselves and celebrate life’s precious moments. In today’s world, we have come to fully appreciate our living spaces where these moments come to life. Our commitment is to deliver a luxury music experience in all Sonus faber homes, which is facilitated through our longstanding tradition of refined materials and careful craftsmanship. LESS IS MORE We executed this minimalistic and perfectly squared design in order to emphasize the quality of materials used. This principal of minimalism directly captures the essence of the product, which was thoughtfully designed in conjunction with the theory “less is more”. Lumina collection comprises the core values of Sonus faber and its iconic materials, such as real multilayer wood, leather and the natural composition of drivers. Simplicity remains central to the collection’s identity with its easy set-up, accessible price point, and excellent sound performance, empowering everyone to enjoy a true Sonus faber experience completely made in Italy. YOUR HOME THEATER EXPERIENCE The essential combination of the three models is a perfectly balanced solution for traditional stereo system enthusiasts as much as for those looking to experience a multichannel home theater system. Lumina I looks great as an individual stereo pair or as surround speaker in a cinema set up; Lumina III ensures powerful, distortion-free sound and high speech intelligibility for games and movies; Lumina Center I is perfectly aligned in appearance and acoustics with its siblings in the full collection. Support Manual Review
    ₹ 285,900
  • ProAc Response DB3 Bookshelf Speaker (Pair)

    ProAc
    ₹ 288,000- ₹ 341,000
    ProAc Response DB3 is a new high-end stand mount loudspeaker available at an affordable price offering good efficiency and a rich sound that belies its compact size. Small high quality loudspeakers have become very popular, being less of an eyesore whilst reproducing some quite respectable sound quality. The new Response DB3 has a similar cabinet size to the Response DB1. There are structural and visual differences to the cabinet of the Response DB3, it also employs a new bass driver and crossover which have been chosen for their exceptional performance with a more affordable price. The new Response DB3 has a wonderfully rich and extended bass quality, loaded with a single reflex port in the rear of the cabinet. The tweeter is our ProAc one inch soft dome used in many other ProAc designs. This one inch silk dome has a superbly flat response with electrostatic type detail and sweetness to its qualities. A newly designed bass driver with a special surround and dust cap, allows extra information from the voice coil giving a smoother transition of frequencies to our one inch dome tweeter. The bass driver is a long throw design with a raised spider and linear motor system. The new bass driver is responsible for the remarkable bass extension. Exceptional Performance DB3 continues the legendary ProAc stand mount tradition and produces an excellent level of sound quality when partnered with high-quality electronics. Featuring a similar cabinet size to that of the Response DB1, there are structural and visual differences including a new bass driver and crossover which were chosen for exceptional performance but at a more affordable price. Superb Bass Extension The new Response DB3 has a wonderfully rich and extended bass quality, loaded with a single reflex port in the rear baffle of the cabinet. The newly designed bass driver with a special surround and dust cap, allows extra information from the voice coil to give a smoother transition of frequencies to the 1" dome tweeter. It is a long throw design with a raised spider and linear motor system and is responsible for a remarkable bass extension. Soft Dome Tweeter The tweeter is ProAc's 1" silk soft dome with special coolant, used in many other ProAc designs, which has a superbly flat response with electrostatic type detail and sweetness. This is combined with a 5” long throw unit incorporating mikapulp cone and a transparent dust cap. Detailed Reproduction The crossover has been designed to seamlessly mate with the tweeter using the finest components on the dedicated circuit board. Multistrand oxygen free copper cable is used throughout which is split for optional Bi-wiring or Bi-amplification The sound quality is what music lovers have come to expect from ProAc with a very natural presentation, excellent detailed, sweet high-frequency reproduction and exceptional soundstage. Stunning Finishes ProAc DB3 is available in the usual choice of standard wood veneer finishes which now includes natural oak. The other standard finishes are black ash, maple, Cherry, silk white or mahogany. Rosewood and ebony finishes are also available at a premium. This wide choice of finishes ensures you find the right style to match your home decor or personal choice. Specifications Nominal Impedance: 8 Ohms Recommended Amplifiers: 2 0 to 100 watts Frequency Response: 38Hz to 30KHz Sensitivity: 88.5db linear for 1 watt at 1 metre Bass/Midrange: ProAc 5 inch long throw unit with mikapulp cone and transparent dust cap. Tweeter: ProAc 1 inch silk dome with special coolant. Crossover: Finest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi wiring or Bi amplification Dimensions: 12.5" (320mm) high, 7.28" (182mm) wide, 10.4" (280mm) Weight: 19.6lbs (8.8 Kgs) each Mode: Stand mounted Grille: Acoustically transparent crimplene Standard Finishes: Black Ash, Mahogany, Cherry, Maple, Oak, Silk White. Premium Finishes: Rosewood, Ebony. Please enquire about premium finishes *Premium Finishes to order at extra cost* Note: Stands Not Included
    ₹ 288,000- ₹ 341,000
  • B&O Beosound 2 (3rd Gen) - Multiroom Wireless Streaming Speaker

    Bang & Olufsen
    ₹ 290,000
    The B&O BeoSound 2 (Generation 3) is captivating from every angle. No matter where and how you play. Wireless speaker system with powerful 360-degree sound performance. Crafted in solid aluminium and designed for easy streaming via Chromecast Built-in, Apple AirPlay 2 and Bluetooth. Beosound 2 is a complete and striking Multiroom speaker that complements any home interior either standing free on the floor or placed on low furniture. Beosound 2 delivers stellar and truly powerful sound performance. Applying our Acoustic Lens Technology into the conical speaker body creates a 360-degree sound experience that fills the entire room from anywhere you place the speaker. Beosound 2 is designed for flexibility. Delivering the morning news from the kitchen table or playing discreetly from the living room floor. With its clean lines and small footprint, it has an adaptable design that fits in everywhere in your home. Crafted in high-grade aluminium with incredible attention to detail. But our material choice go well beyond aesthetics. It also provides superior acoustic properties thanks to its material stiffness and seamless surfaces that eliminate any distortion of your sound. Beosound 2 works out where it is in the room to give you perfect playback, every time. Ensuring bass, mids and highs are never too overpowering or weak. Wherever you place it, it gives a standout performance. No muddiness. No fuzziness. Just pure, clean sound. As the artist intended. Beosound 2 has a built-in proximity sensor that makes the control panel light up when your hand is hovering over the controls. The top of the speaker works as a minimalistic control panel. Simply tap one of the four favourite buttons to start one of your preferred radio stations or playlists, turn the wheel to adjust the volume and tap on one of the arrows to change tracks. Features Powerful speaker system with deep bass Advanced 360-degree sound technology Full streaming freedom over wifi and Bluetooth Built for seamless multiroom experiences Meticulous craftsmanship and attention to detail Rich, dynamic and full of finesse Beosound 2 delivers stellar and truly powerful sound performance. Applying our Acoustic Lens Technology into the conical speaker body creates a 360-degree sound experience that fills the entire room from anywhere you place the speaker. Aesthetic functionalism Beosound 2 is designed for flexibility. Delivering the morning news from the kitchen table or playing discreetly from the living room floor. With its clean lines and small footprint, it has an adaptable design that fits in everywhere in your home. A seamless piece of beauty Crafted in high-grade aluminium with incredible attention to detail. But our material choice go well beyond aesthetics. It also provides superior acoustic properties thanks to its material stiffness and seamless surfaces that eliminate any distortion of your sound. Get more done with just your voice Beosound 2 with the Google Assistant. You can easily enjoy music at home just with your voice; you can play your favorite music, control volume and find information about the song that you are listening to, hands-free. You can also plan your day, set alarms and control smart devices around your home - just by using your voice. The essence of control Beosound 2 has a built-in proximity sensor that detects your presence and automatically turns the control interface towards you. The top of the speaker works as a minimalistic control panel. Simply tap to start your favourite radio station, turn the wheel to adjust the volume and swipe to change tracks. Specifications Recommended Room Size 10-60 m² 100-600 ft² Speaker Configuration 1 x ¾" tweeter 2 x 2" mid-range 1 x 5 ¼" woofer Amplifier 1 x 15 watt class D for tweeter 2 x 15 watt class D for mid-range 2 x 30 watt class D for woofer Frequency Range 33 - 23.400 Hz. Maximum Sound Pressure Level @1m 94 dB SPL Bass Capability 84 dB SPL Stereo Pairing Pair two Beosound 2 3rd Gen to enjoy a stereo listening experience. Advanced Sound Features Active Room Compensation, Acoustic Lens Technology, Adaptive Bass Linearization, Thermal Protection Customizable Sound EQ Presets available and fully customisable through the Bang & Olufsen App Materials Aluminium Polymer Dimensions (Width x Height x Depth) (cm) 20 W x 43.1 H x 20 D cm Weight 4.1 kg Support Datasheet Manual
    ₹ 290,000
  • NHT C4 - Floorstanding Speaker (Pair)

    NHT
    ₹ 296,000
    The NHT The C-4 is perfect for a stand alone music system and has the capacity to play louder than its predecessor, the Classic Four, in a home theater system. Previously, NHT’s larger towers had a side-loaded subwoofer integrated into the cabinet. However, we noticed that our customers were adding subwoofers to their tower systems, resulting in lower frequency sonic issues as well as general clutter. We thus simplified the design with the C-4, which now has all front firing drivers housed in a much smaller enclosure. The C-4 is perfect for a stand alone music system and has the capacity to play louder than its predecessor, the Classic Four, in a home theater system and it requires far less power to drive. Used in conjunction with the NHT C-3 as surrounds, two CS-10 subwoofers and our IC3-ARC for height channels and you will have a jaw- dropping 7.2.4 Atmos/DTS:X system. The C SERIES represents a fresh look at our signature audio series of speakers; it takes the best of our Classic line and adds subtle sonic improvements to each of the models. Music reproduction is exactly what you’d expect from NHT: incredible detail, powerful dynamics, and pinpoint imaging. The C SERIES improves on any home theater with benefits from high output along with friendly room and placement designs. Further, the C SERIES provides a modern cosmetic and better serviceability. Like our previous models, the cabinets feature a heavily braced, MDF substructure and are finished with 7 coats of hand polished, high-gloss piano black lacquer. All C Series speakers are acoustic suspension providing fast, tight response. Specifications Configuration 4-way acoustic suspension Woofer 2 x 6.5” aluminum cone Lower Midrange 1 x 6. 5” aluminum cone Midrange 1 x 5.25” aluminum midrange Tweeter 1 x 1” aluminum dome Up-Firing Driver 1 x 3" paper cone Frequency Response 58Hz-20kHz Sensitivity 87dB (2.83v@1m) Impedance 6 ohms nominal, 4.2 ohms mi nimum Inputs Nickel plated 5-way binding posts Power Handling 75 - 150 w/ch System Type Tower speaker, Designed for Dolby Atmos Dimensions 39" x 5.75" x 7" (H x W x D) Weight 29.2 lbs. Finish High-gloss Black
    ₹ 296,000
  • ELAC 4Pi Plus.2 - Omnidirectional Ribbon SuperTweeter (Pair)

    ELAC
    ₹ 299,900
    Placing the Omnidirectional 4Pi Plus.2 Ribbon Super-Tweeter on top of your main, direct-radiating loudspeakers results in perfect spaciousness not found with any conventional loudspeaker. Equipped with flexible options for adjusting sensitivity and the lower cutoff frequency, the 4Pi Plus.2 can be seamlessly integrated with virtually any loudspeaker. It enables the sound to break free from the loudspeakers and fill the entire room. All without the need for additional amplification. Immerse yourself in music—the ELAC 4Pi ribbon tweeter reproduces high frequencies in 360-degree surround sound, adding an incredible illusion of spaciousness to every piece of music. The 360-degree omnidirectional ribbon tweeter yields a resonance-free upper cut-off frequency of 53 kHz and makes this tweeter an ideal component for the reproduction of Hi-Res, SACD and DVD-A source material. Its' impressive and silky sound quality lends realistic air to voices and complex recordings. The design principle incorporates an 0.006 mm aluminum ribbon to form the membrane, ultra-light in weight with an extremely high sensitivity. When a current passes this membrane, it expands and contracts like a breathing cylinder. Driven by a strong neodymium magnet system, the flexible ribbon yields exceptional response that is flat well beyond the limits of human hearing but essential to the accurate reproduction of ambience and hence, musical realism. Specifications Speaker type: Add-on high-frequency driver Tweeter: 1 x 4Pi Plus.2 Crossover frequency: 10,000 / 12,000 / 15,000 Hz adjustable Frequency response: 10,000 to 50,000 Hz Sensitivity: 84 to 92 dB at 2.83 v/1m Recommended amplifier power: 20 to 400 wpc Nominal/peak power handling: 400 / 600 wpc Nominal impedance: 6 Ω; minimum 3.5 Ω @ 10,000 Hz Binding posts: 5-way metal Magnetic shielding: No Cabinet finish: High gloss black Height: 5.6 in / 143 mm Width: 5.9 in / 150 mm Depth: 9.8 in / 250 mm Net weight (each): 8.8 lb / 4.0 kg Awards & Reviews 6Moons
    ₹ 299,900
  • Fyne F502 - Floorstanding Speaker

    Fyne
    ₹ 299,900
    The F502 floorstanding loudspeaker delivers the series’ signature clarity and articulation along with visceral bass. The system will suit larger listening environments but is capable of revealing a huge dynamic range even when played at low volumes in smaller rooms. Isotropic energy radiation, with point source constant directivity, is provided by a 200mm (8″) proprietary IsoFlare TM driver for outstanding stereo imaging, even off axis. A matched 200mm (8″) bass driver is also fitted to the 64-litre cabinet ensuring a breath-taking musical or home theatre experience. Ideal for medium to large-sized rooms, the F502 is supplied with a dedicated plinth incorporating our BassTrax TM Tractrix diffuser system, which integrates bass energy uniformly into the room. The luxuriously finished, contemporary styled cabinet is available in a choice of dark oak or black oak real wood veneer and piano gloss black or white. Enhancing its aesthetic appeal, it has a gently curved front and rear baffle which additionally benefits the acoustic performance by reducing colouration effects. System Type 2 ½ way, downwards firing port, with BassTrax TM Tractrix diffuser. Twin cavity coupled reflex Recommended amplifier power (Watt RMS) 40- 180 Continuous power handling (Watt RMS) 90 Sensitivity (2.83 Volt @ 1m) 91dB Nominal impedance 8 Ohm Frequency response (-6dB typical in room) 30Hz- 34kHz Drive unit complement 1 x 200mm IsoFlare TM , multi-fibre bass/ mid, with 25mm titanium, dome compression tweeter. 1 x 200mm multi-fibre bass Crossover frequency 250Hz & 1.7kHz Crossover type 2nd order low pass, 1st order high pass Dimensions - HxWxD 1114 x 250 x 380mm (43.9 x 9.8 x 15.0”) Weight - Each 25.2kg (55.6lb) Finishes Dark Oak
    ₹ 299,900
  • KEF R3 Meta - Bookshelf Speaker Pair

    KEF
    ₹ 299,900
    The KEF R3 Meta redefines bookshelf speaker’s performance. Sharing the same drivers as the range-topping R11 Meta, the R3 Meta is a true three-way design. It has a 12 th generation Uni-Q ® driver array with MAT ™ and a powerful 6.5” hybrid aluminium bass driver that pushes performance to new extremes. Since 1961, KEF has strived to reproduce pure sound precisely as it was meant to be heard. Decades of experience in acoustic innovation and the quest for music perfection come together in the R Series to deliver sound with more detail and deeper insight; sound that ignites excitement every time you experience it. The R Series is a direct beneficiary of the technological innovations developed for The Reference, the class-leading series that continually set the benchmark for loudspeakers and sound reproduction. Combining with bespoke technologies, the R Series delivers an exceptional acoustic performance. The revolutionary Metamaterial Absorption Technology1 (MATTM) has been incorporated into the latest iteration of the R Series, and the 12th generation Uni-Q® driver array has been refined to maximise the impact of this technological advance and ensure the best possible performance. The result is an exceptional seven-model range of loudspeakers, engineered to deliver with exquisite detail and incredible insight. Whether your taste lies with traditional two-channel HiFi, multi-channel home theatre or both, the R Series reveals levels of detail that must be heard to be believed. At the heart of the latest R Series is Metamaterial Absorption Technology (MAT), a revolutionary innovation that takes the performance of the 12th generation Uni-Q driver array to another level in terms of accuracy and clarity. MAT is a highly complex maze-like structure, where each of the intricate channels efficiently absorbs a specific frequency. When combined, the channels act as an acoustic black hole, absorbing 99% of the unwanted sound that comes from the rear of the tweeter, eliminating the resulting distortion and providing a purer, more natural acoustic performance. Features Metamaterial Absorption Technology (MATTM) eliminates 99% of high-frequency distortion for pure, natural sound Bespoke 12th generation Uni-Q with MAT driver array for exceptional acoustic accuracy Refined tweeter gap damper tames resonances for improved detail Flexible Decoupling Chassis prevents unwanted vibrations for better clarity Enhanced crossover design fine-tuned the signal path for pristine, clean sound Available in Black Gloss, White Gloss and Walnut finishes, plus an exclusive Indigo Gloss Special Edition for R3 Meta Microfibre grilles offer the perfect balance between driver protection, sonic performance and aesthetics S3 Floor Stand for R3 Meta is available as separate item Specifications DESIGN Three-way bass reflex DRIVE UNITS Uni-Q Driver Array: HF: 25 mm (1 in.) vented aluminium dome with MAT, MF: 125 mm (5 in.) aluminium cone, Bass Unit: LF: 165 mm (6.5 in.) hybrid aluminium cone CROSSOVER FREQUENCY 420 Hz, 2.3 kHz FREQUENCY RANGE (-6dB) 38 Hz - 50 kHz TYPICAL IN-ROOM BASS RESPONSE (-6dB) 30 Hz FREQUENCY RESPONSE (±3dB) 58Hz - 28kHz HARMONIC DISTORTION (90dB, 1m) <1% 73 Hz and above, <0.5% 90 Hz - 20 kHz MAXIMUM OUTPUT 110 dB AMPLIFIER REQUIREMENTS 15 - 180W NOMINAL IMPEDANCE 4 Ω (min. 3.2 Ω) SENSITIVITY (2.83V/1m) 87 dB WEIGHT 12.4 kg (27.3 lbs) [per unit] DIMENSION (H x W x D) WITH TERMINAL 422 x 200 x 336 mm (16.6 x 7.9 x 13.2 in) FINISHES Black Gloss / White Gloss / Walnut / Indigo Gloss Special Edition Support Brochure Datasheet White Paper User Manual Option S3 Stands Awards & Reviews
    ₹ 299,900
  • SVS Prime Pinnacle Floorstanding Speaker (Pair)

    SVS
    ₹ 305,000
    The ultimate expression of what SVS sought to create with the Prime Series loudspeakers is epitomized in Prime Pinnacle. Audiophile refinement and musicality without sacrificing wide dynamic range, deep, effortless bass and all the excitement of a world-class loudspeaker. SVS acoustic engineers spent more time voicing Prime Pinnacle than any speaker in SVS history, in large part to create a loudspeaker that was equally suited to meet the demands of both discerning audiophiles and hardcore home theater fans. To go even further, Prime Pinnacle’s cabinet design was made to blend seamlessly and sound amazing in any listening environment. World-class performance in both a two-channel HiFi stereo or an immersive home theater surround sound system, Prime Pinnacle is unrivaled in its class and well-beyond. Audiophile refinement with breathtaking bass, clarity, and dynamics, the Prime Pinnacle speaker hits the ultimate sweet spot for immersive music and home theater. A triple ported cabinet design, custom drivers, and SoundMatch 3-Way Crossover highlight the tower speaker design, rendering pristine full-range output. Audiophile Refinement. Breathtaking Home Theater Dynamics. Design innovations in the Prime Pinnacle speaker harness qualities both discerning audiophiles and home theater fans will delight over. All-new driver array is optimized for massive dynamics and incredibly refined output while the cost-no-object cabinet design and materials, sophisticated components and inspired acoustic engineering combine for a floorstanding speaker that stands alone at its price and well beyond. All-New 5.25" Midrange Driver with Composite Glass-Fiber Cone Delivers pinpoint accuracy and broad soundstage for more immersive audio experiences. The majority of audio content in music and movies is present in the midrange frequencies so it’s imperative to have a driver capable of producing slam and impact as well as subtle details with tonal accuracy. Prime Pinnacle’s midrange borrows design elements from the reference Ultra Series to deliver uncompromised audio performance at all drive levels. Premium 1” Aluminum Dome Tweeter Renders crystal clear highs with lifelike realism even at reference volume. Light, efficient and impervious to distortion, the tweeter’s airy’ presentation effortlessly reveals every sonic detail with pristine clarity and unerring accuracy. The FEA-optimized diffuser ensures broad dispersion for a wide and convincing soundstage with pinpoint on- and off-axis frequency response so everyone in your room is treated with the same amazing audio experience. Trio of 6.5” High-Performance Woofers Effortless low frequency output and impressive deep bass extension from three 6.5” woofers lays the sonic foundation for all audio content. Engineered to convey the full thrill and excitement of cinematic blockbusters yet refined enough to handle the pluck of a bass guitar string and subtlest musical details with convincing realism, Prime Pinnacle delivers an amazing full-range listening experience with all audio content. By using three smaller woofers, each with its own 2-inch port, the new floorstanding speaker effortlessly conveys low frequency output while maintaining a slim profile that fits in any room or system. Three Unique Port Tuning Frequencies Individual tuning frequencies and separate sub-enclosures for the trio of woofers epitomizes the no compromise design approach taken with Prime Pinnacle. This design ensures all drivers blend seamlessly together so you get silky-smooth transitions from the midrange driver to the woofers as well as accurate frequency response, amazing refinement and crisp speed in transients; all without sacrificing deep, room-energizing bass. SVS SoundMatch 3-Way Crossover Creates an expansive soundstage with accurate frequency response and precise imaging for largest “sweet spot” possible. The 3-way crossover is uniquely tuned so each driver, from tweeter to midrange and midrange to woofers, blend seamlessly with each other while offering excellent on and off-axis frequency response and pinpoint spatial imaging for the most convincing audio experience possible. The crossover’s topology and architecture are consistent with all SVS speakers so Prime Pinnacle is timbre matched to integrate with any speaker from the acclaimed Prime or Ultra Series for the ultimate flexibility when building a system. Sonically Inert and Rigidly Braced Cabinet Four self-contained, acoustically tuned internal chambers eliminate any potential for resonances or sonic artifacts from the enclosure, resulting in pristine audio playback across the frequency spectrum. Tapered edges on the Prime Pinnacle speaker’s front baffle, known as chamfers, minimize edge diffraction for a clear and precise soundstage while features like shorting rings and tweeter diffusers provide acoustic enhancements with modern, high-end visual appeal. Lifestyle-Friendly Footprint Fits seamlessly in any room layout or décor. Slim enough to place next to furniture or near a wall, yet spacious enough to produce effortless output and reference sound quality, Prime Pinnacle delivers jaw-dropping performances in stereo and home theater systems from a classically handsome tower speaker design. Specifications Frequency Response / Acoustic Data * Frequency response graph does not denote maximum output capability Rated bandwidth: 29 Hz-25 kHz (±3 dB) Nominal impedance: 8 ohms Sensitivity: 88 dB (2.83V @ 1 meter full-space, 300-3kHz) Recommended amplifier power: 20-300 watts Speaker Specs Floor Standing Tower Loudspeaker Black ash and piano gloss black finish options 5-way binding posts Triple 2” wide-flared rear-firing ports Cloth grille with pin/cup retention system Cabinet Dimensions: 40.5" (H) X 8" (W) X 13.4" (D) Overall Dimensions: 41.1" (H) X 8" (W) X 13.9" (D) (includes grille, feet and binding posts) Shipped Dimensions: 46.5" (H) X 14.8" (W) X 19" (D) Weight Packaged: 66 lbs (29.9 kg) Weight Unboxed: 57.1 lbs (25.9 kg) Driver Specs 1” Aluminum Dome Tweeter FEA-optimized diffuser for airy and unveiled presentation Aluminum dome for exceptional transient response Triple 6.5” Woofers Long stroke motor and suspension for high output Polypropylene cone for excellent stiffness/mass ratio and pistonic behavior Aluminum shorting ring to reduce gap inductance, lower distortion, and enhance high frequency response Cast ABS-fiberglass composite basket ensures precision component alignment and excellent thermal transfer Vented voice coil former minimizes air compression artifacts 5.25” Midrange Driver Composite glass-fiber cone with excellent stiffness/mass ratio for high sensitivity and pistonic behavior beyond pass band Aluminum shorting ring to reduce gap inductance, lower distortion, and enhance high frequency response Cast ABS-fiberglass composite basket ensures precision component alignment and excellent thermal transfer Vented voice coil former minimizes air compression artifacts Crossover & Cabinet Specs Crossover 3-way crossover with premium-grade capacitors, air-core inductors and heavy-trace printed circuit boards 2-piece PCB design reduces component interference Tweeter-to-Midrange crossover: 2.1kHz (12 dB/octave slopes) Midrange-to-Woofer crossover frequency: 300Hz (12 dB/octave slopes) Cabinet Separate sealed midrange enclosure with angled bracing diffuses and shifts standing waves beyond the driver pass band, improving sound quality Three separate woofer enclosures with optimized port tuning frequencies for smooth and accurate bass response Acoustically transparent and FEA optimized grilles minimize diffraction Chamfered front baffle and flush-mounted drivers reduce edge diffraction and improved on-axis high frequency response FEA-optimized cabinet and angled bracing eliminates resonances and improves cabinet rigidity for acoustically inert enclosure Support Manual
    ₹ 305,000
  • Golden Ear Triton Five - Floorstanding Speaker

    Golden Ear
    ₹ 308,000
    GoldenEar’s Triton Towers have set the audio world on its proverbial ear with extraordinary sound quality, elegant styling and unequalled value. They have earned an incredible series of awards and honors all around the world. Tritons are the latest signature creation of Sandy Gross, whose Grand Prix Award winning loudspeakers have been impressing and delighting reviewers and listeners for over 40 years. Incorporating cutting-edge technologies like High Velocity Folded Ribbon tweeters, advanced technology drivers with our highly evolved and sophisticated bass-loading technology, linear phase crossover networks and inertially-balanced quadratic planar infrasonic radiators, they are, in the words of Stereophile’s Robert Deutsch, “the holy grail of audio that we all seek.” Tritons will absolutely bring all your music and movies to life! The Triton Five is a larger version of the Award Winning Triton Seven, with greater dynamic range and even deeper bass extension, plus important refinements carried over from the Triton One development program. As with all of our Triton Towers, the Triton Five’s high-resolution sonic performance makes it ideal for use in two channel systems of the highest quality, as well as complete multi-channel surround music and home theater systems. “They absolutely rock the speaker world’s foundation to the core … delivering the kind of musical bliss some pay upwards of $10,000 for” , raves Caleb Denison of Digital Trends . The Five’s unique cabinet shape is both acoustically purposeful as well as strikingly attractive. Its narrow front baffle and stylish rearward rake, in conjunction with the complex crossover, both aligns the driver array precisely for a coherent wave-launch directed at ear level at the listening position, as well as results in non-parallel front and rear baffles for better control of internal standing waves. And, the non-parallel side cabinet walls and slanted top provide the same acoustical performance benefit. A D’Appolito array of two newly developed 6" long-throw midrange/bass drivers surround the same High Velocity Folded Ribbon Tweeter (HVFR™) used in all the Triton Towers. The Five incorporates FOUR side-mounted, opposing, inertially-balanced planar sub-bass radiators, located on either side of the cabinet down near the floor for optimum coupling to the room. And the Fives will deliver exceptional performance with moderately priced receivers, while also allowing you to appreciate the subtle qualities of the world’s finest audio components. Click here to read the Brochure.
    ₹ 308,000
  • Legacy Audio Studio HD Bookshelf Speaker (Pair)

    Legacy Audio
    ₹ 308,000- ₹ 391,000
    Originally designed as a monitor for a top recording studio, the Legacy Studio HD offers unmatched clarity and dynamics in a compact enclosure. Don’t let its size fool you. The Studio HD is a butt kickin’ compact monitor featuring an 8” Silver/Graphite bass/midrange driver and a 1” dual pole AMT folded ribbon . The sound is open and airy, yet a kick drum “feels” like a kick drum. Vocals are robust and effortless. You can hear lungs fill with air before the first note is sung. Studio HD excels as both a left and right main speaker, as well as a surround speaker for Atmos® systems. Coupled with the Metro XD subwoofer, Studio HD offers a building block approach to true high-end audio. The Studio HD cabinet is constructed of 1.125" MDF and is available in a wide variety of décor friendly finishes, such as the premium Black Pearl, shown here. Features 1” Dual Pole AMT - The Legacy 1” dual pole AMT folded ribbon delivers airy and clear highs up to 30 kHz and is the same award-winning Legacy AMT found in the larger Focus SE & Aeris floor-standing speakers. 8” Proprietary Woofer - Studio HD features a proprietary 8” woven Silver/Graphite bass/midrange driver with a cast basket. The woofer is crossed over at 2.8kHz and a phase plug is implemented to prevent acoustic interference across the larger surface area of the driver. Thanks to extra deep tuning of this ultra-efficient driver, the Studio HD keep perfect rhythm down to the lowest note on the bass guitar- E 41 Hz. Bi-Amp/Bi-Wire Capable - The rear terminal plate of the Studio HD features removable copper jumpers to facilitate bi-amping or bi-wiring if desired. The dual binding posts accommodate banana, spade or bare wire connections. Independent high and low frequency contour switches allow you to adjust the speaker to your room. Finishes - Choice of premium finishes Specifications Application: Studio grade reference monitor System Type: 2 Driver, 2 Way Tweeter: 1" dual pole AMT folded ribbon Midwoofer: 8" Silver/Graphite woven diaphragm, cast basket, phase compensation plug Frequency Alignment: B4 Reflex, rear ported Inputs: 2 pair binding posts for Treble and Bass Recommended Amplification: 15-200 watts Frequency Response (Hz +/- 2dB): 41-30k Impedance: 4 Ohm Sensitivity: 91 dB (2.83V @ 1m) Crossover: 2.8k Dimensions (HxWxD, inches) 13 x 10.8 x 10.8 Weight: 30 lbs each Shipping Weight: 74 lbs per pair Support Manual Reviews & Awards Stereophile
    ₹ 308,000- ₹ 391,000
  • Aurum Cantus Melody M-103 SE Floorstanding Speaker (Pair)

    Aurum Cantus
    ₹ 310,000
    The Aurum Cantus Melody M-103 SE incorporates an aluminium ribbon tweeter that has great value and world-class performance. It offers a combination of real natural sound, graceful timbre making the speaker suitable for all music tastes. Features 2-way vented speaker 7" sandwich cone midwoofer and woofer Aluminium Ribbon Tweeter High quality crossovers Specifications Design :2-way vented-box Frequency Response :35Hz-40kHz Sensitivity (2.83V/1m) :89dB Impedance :8 ohms (minimum 6.4 ohms) Power Requirement :50-200W recommended Tweeter :Model:APR3.2. Sandwich aluminum ribbon tweeter, the size of aluminum ribbon(LWT):100mm×8.5mm×0.015mm. High power handling, high output,shielded design , easily field-replaceable for the ribbon. Midwoofer :Model:AC180/DC50C2C, 1×180mm (7″). Aluminum frame, the sandwich cone of Non-woven carbon fiber+Cell+Non-woven carbon fiber, 50mm (2″) copper clad aluminum voice coil with flat wire, the special magnet system with Faraday ring and demodulation coil, 120mm×20mm Y30 Ferrite magnet. Crossover Frequency :2400Hz Crossover’s Attenuation Slope :Woofer -12dB, Tweeter -18dB Crossover Components :High quality MKP capacitors. Also, high purified OFC inductors and the metal oxide film resistors with military industrial standard. Connective Cable :Teflon insulated OCC cable Damping Material :The polyester fiber and the PU foam Connections :4 pcs 18mm gold-plated copper connectors, Bi-wiring Cabinet Material :High quality MDF Standard Finish :Padauk PU matt paint, Maple PU matt paint, Cherry PU matt paint and Rosewood PU matt paint Special Finish : Cherry PE high gloss paint, Maple PE high gloss paint and Rosewood PE high gloss paint Dimensions (HWD):1040mm×255mm×403mm (40.94″×10.04″×15.87″). Net Weight :26.2kgs/pc (57.70lb/pc)
    ₹ 310,000
  • Pylon Audio Jade 20 - Floorstanding Speaker (Pair)

    Pylon
    ₹ 315,000- ₹ 382,000
    A modern, technologically advanced loudspeaker, with a strong, but colorful and spatial sound, wrapped in a tasteful, timeless vintage-style enclosure – this is what motivated Pylon when designing the Jade 20. In this two-way design, we entrusted the lower bandwidth to a designed in house, 12-inch midwoofer with a classic, paper diaphragm. The BMS compression driver, responsible for the top, is working in a short tube with a Tractrix profile, specially designed by our engineers. The appropriate selection and efficiency of the transducers allowed us to obtain a bandwidth division at around 1200 Hz. Thanks to the 8-ohm impedance and efficiency of 91dB, the Jade 20’s are easy to set up - they can be easily driven by a low-power tube amplifier and they’re showing their claws and full potential with a powerful transistor amp. The loudspeaker housings are made of massive MDF boards, additionally reinforced with internal ribbing and trusses ensuring the appropriate rigidity of the structure. We have optimized the casings to work both on a low support, which is included in the standard equipment, and an accessory, higher stand. The Jade 20 is finished with a natural, oil-waxed American walnut veneer, emphasizing their vintage aesthetics. The Jade 20 is an outstanding concert-like performer: a combination of "strong sound" with unlimited freedom and the natural scale of the instruments. The loudspeakers sounds vital, with a strongly marked foreground, rhythmic and strong bass and a colorful highs. This set would create a friendly concert atmosphere during hours long listening sessions as well as a suggestive background for both work and relaxation. The columns are dedicated for use in rooms with a floor area from 18 to 45 m2. Specifications Impedance 8 Ohm Bandwidth 35Hz - 20kHz Nominal power 140W Maximum power 220W Efficiency 91dB Dimensions [W x H x D] 386x640x420 mm - height with wooden stands and slides: ca. 691 mm - height with the optional metal stand and feet: ca. 857 mm. Weight 25kg / pcs Tweeter Pylon Audio PST 25PO.8 Woofer Pylon Audio PSW 32.8 CS Speaker grille Yes Spikes Yes Warranty 4 years Available colours: - American Walnut, with oil-wax PURE
    ₹ 315,000- ₹ 382,000
  • Audio Solutions Figaro C2 Centre Speaker

    Audio Solutions
    ₹ 317,900
    Meet the all-new Figaro! An evolution of our most successful speaker series. Five years have passed since the original Figaro was introduced in 2018 and yet we are pushing the limits once again. The new Figaro is vastly improved in all aspects. Embrace a new modern design with brass metal accents and satin color options. We give you a remarkable tandem of performance and design where science meets art. Figaro! maintains timeless AudioSolutions design. Designed to be easily driven by most amplifiers and with the ability to be placed very close to the wall. Figaro's task is to make your life easier with as simple as possible setup, cable, and amplifier matching. We wish you many great moments while listening to your Figaro. Two-way speaker system designed with Mini-Horn loaded silk dome tweeter and our unique midbass driver which works in extended mid-band effectively making it an Extended-Band driver, allowing us to push crossover frequencies of the drivers further away from the most critical area for the human ear - 1000-1500Hz and thus reduce crossover distortions and perception of them. Two whole new re-designed ER (Extra Rigid) hard paper cone bass drivers deliver faster and deeper bass response and improve overall sound clarity. The Cabinet-In-a-Cabinet enclosure system taken from upper scale Virtuoso series contributes to a complex closed system that eliminates unwanted resonances by turning acoustical energy into heat, allowing all drivers to perform with precision and dynamics. Figaro features outriggers with height-adjustable spikes, WBT NextGen connection terminals with bi-amping for models L and XL, and also a whole new 6 unique never seen before satin finishes with brass metal accents. Figaro utilizes a Mini-Horn loading technology to cope with the infamous soft domes problem - cone breakup and cone "walk". Cone breakup and "walk" happens when a soft dome tweeter is being driven hard at high signal levels. Distortions rise exponentially because: a) when a certain point in signal level and thus dome acceleration/amplitude is reached, the center part of the dome flexes in an uncontrolled fashion due to the silk's soft nature b) differences in air pressure behind the dome and in front of the dome creates a nonlinear environment and overcome suspension ability to prevent axial movement of the cone Our Mini-Horn is based on acoustical dampening which happens at the frontal dome area. We carefully measure at which frequencies the dome starts to flex and emit an avalanche of distortions. Mini-Horn then is designed and manufactured according to desired specifications to dampen those frequencies. The result is a proportional dampening of the tweeters’ movement. The louder it plays the more dampening and air pressure on the frontal area it gets from its own emitted sound. It is described as acoustical impedance and is highly dependent on the Mini-Horn's shape. Another positive by-product of this process is that Mini-Horn adds sensitivity and thus the efficiency of the driver. The human ear has uneven sensitivity to different frequencies. We are naturally less sensitive to high frequencies and especially to low frequencies. The exception is sensitivity to mid frequencies in the 1000-2000Hz band due to evolution. Simply put - in nature, the sounds of life-threatening events lie more or less in 1000-2000Hz diapason, so naturally, we are most sensitive to that so we could stay alert. The downside of this phenomenon in this rather safe modern world is that we can hear and pinpoint the slightest imperfections in reproduced sound at those frequencies. And imperfections in sound reproduction are called distortions. Most of the manufacturers calculate crossover points in exactly this area of 1000-2000Hz. Since each driver has its natural spectrum of distortions we actually can hear the transition from one driver to another, let alone an additional distortions caused by the crossover phase shift. The resulting sound is described as an unnatural or multi-way sound. It is not possible to completely eliminate natural-born driver's distortions or the phase shift in crossover which is mathematically tied to how db/oct crossover is calculated. The only way to fight this is to utilize crossover points away from this region of 1-2kHz. For that reason, we created an Extended Band Midrange driver. Crossover points of 400-4000Hz are one octave away from the sensitive band. Not only this solution helps with crossover distortion perception but the listener gets uniform, unchopped sound coming from one driver with virtually zero phase shift. Homogenous sound in our opinion is one of the biggest goals in the audio industry. The new Figaro! speakers share a Cabinet-In-a-Cabinet enclosure design. This system is based on two separate enclosures - an inner cabinet and an outer cabinet bonded together by a thin layer of Polyurethane. The inner cabinet is manufactured of a lightweight yet rigid material that controls primary vibrations by absorbing acoustical power coming from the drivers. Then a thin layer of viscous Polyurethane situated in between the inner and outer cabinets acts as a dampening layer which converts vibrations born in the inner cabinet to heat. The residue of vibrations is then dampened by the outer cabinet which is manufactured of a much heavier and less dense material that acts as a mass damper. Second generation Figaro speaker utilizes re-designed bass drivers with ER paper cones. Er stands for Extra Rigid paper. It is actually visible on the cone surface as flakes of hard pulp and fibers and is natural to rigid cones. ER paper cones were chosen due to all the pros of traditional paper cones and the pros of hard material cones. Hard cones (metal, ceramic, etc.) provide uniform push-pull movement where all cone's points act as a uniform piston which is desirable. Con is that hard cones have the potential to have early break-up points and ringing due to a lack of dampening properties inside the material itself. Paper on the other hand does not have break-up points as it is quite soft and flexible but it does not act as a piston, and usually, the edge of the paper cone are fluttering, and all cone is flexing. Having positive properties of paper and introducing hardening materials like sturdy fibers and hard pulp gives us a unique cone that acts as a piston, but at the same time does not have ringing or early cone breakup points. ER cones allowed us to introduce new piston-like bass drivers and of course our Extended Band Midrange. We introduce as many as 6 standard colors with our "Bespoke" trim. A modern-looking satin color with brass accents looks stylish and refreshing, matching nowadays modern living rooms. A completely new approach to color and material matching allows us to offer a truly bespoke look for your speaker. If you would like to have different cabinet colors, please contact us and our "Exclusive Personalisation" team will help you find your desired color. Features Two-way speaker system with Mini-Horn loaded silk dome tweeter and two ER (Extra Rigid) paper cone mid-bass drivers which are known for a fast transient response, sound clarity and tight bass. Cabinet assembly is based on our Cabinet-In-a-Cabinet technology Figaro features outriggers with height-adjustable spikes, WBT NextGen connection terminals with bi-amping for models L and XL, and also a whole new 6 unique never seen before satin finishes with brass metal accents. Made in Lithuania Specifications Dimensions (HxWxD) : 222mm x 607mm x 339mm; 8.74 x 23.9 x 13.35in Weight : 16 kg/35.3 lbs each Shipping weight : 19 kg/41.9 lbs each Sensitivity : 91 dB @ 2.83V 1m Suggested Amp power : 5-200 W Impedance : nominal 4,0 ohms; Crossover frequency : 4000 Hz Frequency response (in-room environment) : 39-25000 Hz Drivers : 19mm silk dome tweeter, 15.2cm ER paper cone mid-bass drivers
    ₹ 317,900
  • JBL 4305P Studio Monitor - Wireless Streaming Speaker (Pair)

    JBL
    ₹ 319,990
    The JBL 4305P Studio Monitor is a completely self- contained powered loudspeaker system featuring high-resolution streaming audio and prosumer connectivity . Patented JBL acoustic technologies render sound with incredible accuracy and powerful dynamics, while extensive wired and wireless connectivity open a world of possibilities for the music lover and content creator. The integrated streaming engine provides both wired and wireless network audio capabilities via Google Chromecast built-in, Apple AirPlay 2, and Bluetooth audio. A 24-bit/192kHz high-resolution DAC ensures your favorite music comes across with the highest fidelity. In addition to premium wireless audio, the 4305P provides extensive connections for analog and digital physical sources including a professional-grade combination XLR / 1⁄4-inch TRS phono input for use with balanced or unbalanced signals. Features High-performance powered bookshelf loudspeaker system Patented JBL 2410H-2 1-inch (25mm) compression driver and High-Definition Imaging horn Patented JBL JW130P-4, 5.25” (130mm) Pure- pulp Black Paper Cone Woofers with Cast- frames 300W total system power and 24-bit/192kHz high-resolution DAC Google Chromecast Built-in, Apple AirPlay 2, and Bluetooth wireless audio USB and optical digital inputs plus XLR / 1⁄4-inch TRS and 3.5mm analog inputs Available in Natural Walnut or Black Walnut furniture-grade wood veneer finishes Wireless remote included and available MusicLife app for control Specifications Type: Compact, Bass-reflex Loudspeaker System with Built-in Amplification, DSP, and Wireless Connectivity Low Frequency Drivers: JW130P-4, 5.25-inch (130mm) Pure-pulp Black Paper Cone Woofers with Cast-frames High Frequency Drivers: 2410H-2, 1-inch (25mm) Annular Ring, Teonex® Diaphragm Compression Drivers with Advanced HDI TM Geometry Horns Amplifier Power: 300W Class D System Power 150W RMS per Speaker (25W per HF Compression Driver + 125W per LF Woofer) Audio Resolution: Up to 24-bit, 192 kHz (Digital Link connection between spks) Up to 24-bit, 96 kHz (Wireless connection between spks) Frequency Response: 45 Hz - 25 kHz (-6 dB) Crossover Frequency 1,750 Hz Dispersion 90° Horizontal x 60° Vertical (2kHz to 20kHz) Sound Controls: Front Panel: Volume +/- and Source Selection Bluetooth Remote Boundary Compensation (Flat / -3dB) Wireless Inputs: WiFi streaming, Bluetooth 5.1 Wired Inputs: Analog: XLR/1⁄4" Combo and 3.5mm stereo Digital: Asynchronous USB-B and Toslink/Optical Supported Digital Audio Sample Rates (PCM 2CH) Streaming & Local Media: 32kHz/44.1kHz/48kHz/88.2kHz/96kHz/176.4kHz/192kHz SPDIF: Up to 192kHz Bluetooth: Up to 48kHz Music Formats Supported (Local Media) AAC / AIFF / ALAC / DSD (to PCM) / FLAC / MP3 / MP4 / OGG / WAV / WMA Subwoofer Output: Autosensing w/ Auto-engage of 80Hz High Pass Filter Remote Control Type: BTLE Wireless Bluetooth Audio Version 5.1 Profiles: SPP (Serial Port Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Vido Remote Control Profile) Enclosure: Bass-reflex Design with Dual Front-facing Ports 3⁄4" MDF Finished in Satin Walnut or Black Walnut Furniture-Grade Wood Veneer Grille: Dark Blue (with Walnut Cabinet) or Black (with Black Cabinet) Acoustically Transparent Cloth Grille Net Speaker Dimensions with grille: 13.2” H x 8.3” W x 8.8” D (336mm x 210mm x 223.3mm) Net Speaker Weight: Primary: 14.6 lbs (6.6kg) Secondary: 14 lbs (6.4kg) Shipping Units of Measure: System Pairs Gross Shipping Dimensions: 18.13” H x 23.5” W x 11.38” D (460.4mm x 596.9mm x 288.9mm) Gross Shipping Weight: 34.2 lbs (15.5 kg) AC Input Voltage: 100 - 240 VAC (+/-10%), 50/60Hz Support Datasheet
    ₹ 319,990
  • Linn Majik 140 - Floorstanding Speaker (Pair)

    Linn
    Original price₹ 403,900
    Current price₹ 323,000
    First step into serious hi-fi. A full-range yet compact 4 way floorstanding speaker, Majik 140 will bring your music to life without dominating your room. High frequency precision and wide dispersion are provided by the 2K Driver Array featured across the Majik range, while separate bass and mid drivers ensure musical accuracy at lower frequencies. Majik 140 provides great value straight out of the box, as well as offering higher levels of performance through a range of upgrade options, from simple bi-wiring through to a fully Aktiv configuration within an Exakt system. Solid aluminium upgrade stands are also available, providing greater stability and less vibration so you can enjoy better performance across the entire frequency range. A floor-standing loudspeaker which delivers exceptional musical performances with deep, controlled bass, Majik 140 will improve the sound of any music system. Majik 140 features Linn’s 2K driver array – an evolution of the array technology found in Linn’s highest performing loudspeakers – to guarantee exceptionally clean and pure high frequency reproduction. Linn’s speaker cabinets combine master craftsmanship with advanced materials and manufacturing techniques to produce beautiful, high performance acoustic enclosures. Carefully placed internal bracing provides added rigidity and an acoustically inert enclosure for stable mounting of the drive units. Higher levels of performance can be easily achieved with a range of upgrade options, from simple bi-wiring through to a fully Aktiv configuration using eight channels of amplification. Available in a choice of high-grade, real-wood veneer finishes, the timeless design of Majik 140 will enhance your living space. Majik 140 perfectly complements other components in the Linn Majik range, combining premium audio performance with unbeatable value. Majik is a fabulous introduction to Linn. It makes your CD collection sound better than ever, helping you to rediscover your music. Standard speaker finishes are: Black Ash, Cherry, Oak, Rosenut, Walnut and White. High gloss finishes are available as an extra cost option, please call us for details. 2K Driver Array houses the two high frequency drive units High quality separate bass and mid drive units High quality custom-designed passive crossovers Simple upgrade path from single to multi-wiring/amping to fully Aktiv configuration in Exakt system Bass reflex port with rifled design for extended bass Solid aluminium upgrade stands available Standard and high gloss real wood veneer or bespoke colour finishes Specifications Overview Passive floorstanding loudspeaker Main Features Exakt: No | On-board Amps: No | Crossover: Passive Speaker Type 4-way floorstanding Exakt With Exaktbox Space Optimisation Yes – with a Network Music Player Connections Binding posts x 4 On-board Amps None Crossover Analogue Passive Bass System Ported bass reflex Drive Units Tweeter: 16mm silk dome | Midrange: 30mm PU dome | Upper Bass: 160mm doped paper | Lower Bass 160mm sandwiched cone Standard Finishes Black Ash, Rosenut, Walnut, Cherry, Oak, White High Gloss Finishes Piano Black, Rosenut, Walnut, Cherry, Oak, White Custom Finishes Yes – match any colour Cabinet Volume 40 Ltrs Size 25cm (W) x 97.5cm (H) x 33.5cm (D) Weight 21.3 kg (including base) Reviews & Awards Review
    Original price₹ 403,900
    Current price₹ 323,000
    Sale
  • McIntosh LCR80 LCR Speaker

    McIntosh Laboratory
    ₹ 323,900
    The LCR80 speaker projects an extremely wide sound-stage for a greater listening experience from a variety of seating positions, delivering an amazingly full-sounding performance for a speaker of such compact dimensions. With its flexible design, it can be placed in horizontal, vertical or shelf mounted orientations. Complete mounting hardware is supplied for all positions. The machined alloy, high-frequency array is rotatable to optimize the sound for either vertical or horizontal placement without sonic compromise. McIntosh patented Low Distortion/High Performance (LD/HP ® ) woofers are combined with two midranges and a dedicated tweeter to deliver lifelike sound. Voiced to match the XR50 and XR100 speakers, the LCR80 may be used for the left, center or right channels in home theatre systems or in special stereo applications. Patented McIntosh Solid Cinch™ speaker binding posts allow for a simple yet secure connection to your speaker cables, helping to ensure the best possible audio performance. Fine gloss wood finishes are offered in Black, Pear Maple and Red Walnut. Amplifiers from 75 to 300 Watts are appropriate power for LCR80. Features Amazingly full-sounding for a speaker of such compact dimensions, the LCR80 projects an extremely wide sound-stage for a greater listening experience from a wide variety of seating positions. Sonically voiced to match the McIntosh XR50 and XR100 loudspeakers, LCR80s can also be used as Left, Center and Right channel in home theater systems, or combined with a subwoofer for two-channel music systems. The machined alloy high-frequency array is rotatable to optimize the sound for either vertical or horizontal placement without sonic compromise. Mcintosh patented, Low Distortion High Performance (LD/HP) woofers are combined with an array of two midrange/tweeters and a dedicated super tweeter. Wall mounting hardware is included, and allows up to 30 degrees of rotation when needed. When adequately powered, the LCR80 will bring you closer then ever to a live musical event in your home, while taking up less of your valuable space. Available in Gloss Black, Red Walnut, and Pear Maple, the LCR80's high-gloss finishes and fine cabinetry will be a welcome addition to even the most elegantly furnished homes. Made in USA Specifications Impedance Nominal 8 Ohms Power Rating 75 to 300 Watts Frequency Response 80Hz to 45kHz Sound Pressure Level, 2.8V/1m 81dB Crossover 500Hz, 8kHz Number of Woofers 2 Woofer Size 6" Woofer Type Cast Frame, LD/HP ® , Poly Cone Number of Midranges 2 Midrange Size 2" Midrange Type Inverted Titanium Dome Number of Tweeters 1 Tweeter Size 3/4" Tweeter Type Titanium Dome System Type Sealed 3-Way Flexible Placement Grille Black knit cloth, magnetically attached Available Finishes Red Walnut, Black, Pear Maple Unit Dimensions (W x H x D) 24" (61cm) x 8" (20.3cm) x 8-3/8" (21.3cm) (including angled wall mounting brackets) Unit Weight 24 lbs (10.9 kg) Shipping Weight 30 lbs (13.6 kg) Support Brochure Manual
    ₹ 323,900
  • Pylon Audio Diamond 28 mkII - Floorstanding Speaker (Pair)

    Pylon
    ₹ 324,000
    In the Diamond 28 Mk II, we have introduced specially designed by our engineers mid-range drivers from the Norwegian company Seas. They stand out with an unusual 2.5-way design combination: the upper midwoofer with a phase plug and a lightweight 1-inch voice coil, and the lower woofer with a massive magnetic system and a 1.5-inch coil with a wide linear range of motion. Both drivers have been closely matched to each other, ensuring a consistent sound source that is less sensitive to changes in listening height, with improved cooperation in the acoustic field. We have also refreshed the tweeter. It is a Scan-Speak design with a neodymium magnetic system, a dual resonant chamber, and a changed front made of durable cellular rubber in a black color that complements the design. These changes contribute to even better detail and microdynamics in the highest frequencies, along with increased efficiency, control, and reduced nonlinear distortions. In comparison to its predecessor, the design has undergone a subtle facelift. The shape features a slightly greater tilt, which, besides its aesthetic appeal, enhances the time integration of individual frequency bands. The column base has also been completely redesigned, giving the system a sleeker silhouette while maintaining a timeless, minimalist character. In addition to carefully considered and precisely placed reinforcements and ribs, we have applied a new sound-absorbing material alongside natural sheep's wool. The entire setup has been tested using a laser vibrometer and our anechoic chamber. All these changes have resulted in a significant improvement in the sound of the Diamonds. The lowest frequencies have gained in depth, speed, and control. The midrange exhibits even greater naturalness and neutrality, while the high end has become even more detailed. In creating the Diamond 28 Mk II, we aimed to enhance as many possible acoustic and aesthetic features of its predecessor, all while maintaining the same characteristic and sound philosophy of the Diamond series. The columns are dedicated for use in rooms with a floor area from 25 to 45 m2. Specifications Impedance 4 Ohm Bandwidth 34 Hz - 20 kHz Nominal power 120 W Maximum power 250 W Efficiency 89 dB Dimensions [W x H x D] 196 x 1038 x 500 mm Weight 25 kg / piece Woofer Pylon Audio PSW 18.8.CA/X (1xSeas CA18RNX_CUSTOM) Midrange Pylon Audio PSW 18.8.CA/P (1xSeas CA18RLY/P_CUSTOM) Tweeter Pylon Audio PST 19.TN (Scan Speak D2010/852100) Spikes + stand Yes Speaker grille Yes, magnetic Warranty 4 years Available colours - Natural veneer OAK, ennobled with the oil-wax - 11 decors. - Natural veneer OAK, colourless lacquer: wenge, black, walnut, cherry, natural. - High Gloss: white HG, black HG. - Lacquer Mat - white, black. - We can realize individual orders with RAL colours.
    ₹ 324,000
  • Audio Solutions Figaro B2 Bookshelf Speaker (Pair)

    Audio Solutions
    ₹ 324,500
    Meet the all-new Figaro! An evolution of our most successful speaker series. Five years have passed since the original Figaro was introduced in 2018 and yet we are pushing the limits once again. The new Figaro is vastly improved in all aspects. Embrace a new modern design with brass metal accents and satin color options. We give you a remarkable tandem of performance and design where science meets art. Two-way speaker system designed with Mini-Horn loaded silk dome tweeter and our unique midbass driver which works in extended mid-band effectively making it an Extended-Band driver, allowing us to push crossover frequencies of the drivers further away from the most critical area for the human ear - 1000-1500Hz and thus reduce crossover distortions and perception of them. Two whole new re-designed ER (Extra Rigid) hard paper cone bass drivers deliver faster and deeper bass response and improve overall sound clarity. The Cabinet-In-a-Cabinet enclosure system taken from upper scale Virtuoso series contributes to a complex closed system that eliminates unwanted resonances by turning acoustical energy into heat, allowing all drivers to perform with precision and dynamics. Figaro features outriggers with height-adjustable spikes, WBT NextGen connection terminals with bi-amping for models L and XL, and also a whole new 6 unique never seen before satin finishes with brass metal accents. Figaro utilizes a Mini-Horn loading technology to cope with the infamous soft domes problem - cone breakup and cone "walk". Cone breakup and "walk" happens when a soft dome tweeter is being driven hard at high signal levels. Distortions rise exponentially because: a) when a certain point in signal level and thus dome acceleration/amplitude is reached, the center part of the dome flexes in an uncontrolled fashion due to the silk's soft nature b) differences in air pressure behind the dome and in front of the dome creates a nonlinear environment and overcome suspension ability to prevent axial movement of the cone Our Mini-Horn is based on acoustical dampening which happens at the frontal dome area. We carefully measure at which frequencies the dome starts to flex and emit an avalanche of distortions. Mini-Horn then is designed and manufactured according to desired specifications to dampen those frequencies. The result is a proportional dampening of the tweeters’ movement. The louder it plays the more dampening and air pressure on the frontal area it gets from its own emitted sound. It is described as acoustical impedance and is highly dependent on the Mini-Horn's shape. Another positive by-product of this process is that Mini-Horn adds sensitivity and thus the efficiency of the driver. The human ear has uneven sensitivity to different frequencies. We are naturally less sensitive to high frequencies and especially to low frequencies. The exception is sensitivity to mid frequencies in the 1000-2000Hz band due to evolution. Simply put - in nature, the sounds of life-threatening events lie more or less in 1000-2000Hz diapason, so naturally, we are most sensitive to that so we could stay alert. The downside of this phenomenon in this rather safe modern world is that we can hear and pinpoint the slightest imperfections in reproduced sound at those frequencies. And imperfections in sound reproduction are called distortions. Most of the manufacturers calculate crossover points in exactly this area of 1000-2000Hz. Since each driver has its natural spectrum of distortions we actually can hear the transition from one driver to another, let alone an additional distortions caused by the crossover phase shift. The resulting sound is described as an unnatural or multi-way sound. It is not possible to completely eliminate natural-born driver's distortions or the phase shift in crossover which is mathematically tied to how db/oct crossover is calculated. The only way to fight this is to utilize crossover points away from this region of 1-2kHz. For that reason, we created an Extended Band Midrange driver. Crossover points of 400-4000Hz are one octave away from the sensitive band. Not only this solution helps with crossover distortion perception but the listener gets uniform, unchopped sound coming from one driver with virtually zero phase shift. Homogenous sound in our opinion is one of the biggest goals in the audio industry. The new Figaro! speakers share a Cabinet-In-a-Cabinet enclosure design. This system is based on two separate enclosures - an inner cabinet and an outer cabinet bonded together by a thin layer of Polyurethane. The inner cabinet is manufactured of a lightweight yet rigid material that controls primary vibrations by absorbing acoustical power coming from the drivers. Then a thin layer of viscous Polyurethane situated in between the inner and outer cabinets acts as a dampening layer which converts vibrations born in the inner cabinet to heat. The residue of vibrations is then dampened by the outer cabinet which is manufactured of a much heavier and less dense material that acts as a mass damper. Second generation Figaro speaker utilizes re-designed bass drivers with ER paper cones. Er stands for Extra Rigid paper. It is actually visible on the cone surface as flakes of hard pulp and fibers and is natural to rigid cones. ER paper cones were chosen due to all the pros of traditional paper cones and the pros of hard material cones. Hard cones (metal, ceramic, etc.) provide uniform push-pull movement where all cone's points act as a uniform piston which is desirable. Con is that hard cones have the potential to have early break-up points and ringing due to a lack of dampening properties inside the material itself. Paper on the other hand does not have break-up points as it is quite soft and flexible but it does not act as a piston, and usually, the edge of the paper cone are fluttering, and all cone is flexing. Having positive properties of paper and introducing hardening materials like sturdy fibers and hard pulp gives us a unique cone that acts as a piston, but at the same time does not have ringing or early cone breakup points. ER cones allowed us to introduce new piston-like bass drivers and of course our Extended Band Midrange. AudioSolutions' Exclusive Personalisation team is ready to help you to customize your speaker. Please address us for custom coloring or style. We can do small changes and we can make completely tailor-made speakers. Our team works in conjunction with architects, and designers and is ready to make a one-of-one product for your living room. We introduce as many as 6 standard colors with our "Bespoke" trim. A modern-looking satin color with brass accents looks stylish and refreshing, matching nowadays modern living rooms. A completely new approach to color and material matching allows us to offer a truly bespoke look for your speaker. If you would like to have different cabinet colors, please contact us and our "Exclusive Personalisation" team will help you find your desired color. Features Two-way speaker system with Mini-Horn loaded silk dome tweeter and two ER (Extra Rigid) paper cone mid-bass drivers which are known for a fast transient response, sound clarity and tight bass. Cabinet assembly is based on our Self-Locking and Box-in-a-Box technologies. Figaro features height-adjustable feet, "Stealth Grille" system, WBT NextGen connection terminals and 17 different unique never seen before finishes. All of them piano gloss! Made in Lithuania Specifications Dimensions (HxWxD) : 337mm x 223mm x 339mm; 13.27 x 8.78 x 13.35in Weight : 10 kg/22 lbs each Shipping weight : 12 kg/26.4 lbs each Sensitivity : 89.5 dB @ 2.83V 1m Nominal power handling : 5-150 W Maximum unclipped power handling : 100 W; Impedance : nominal 4,0 ohms; Crossover frequency : 4000 Hz Frequency response (in-room environment) : 42-25000 Hz Drivers : 19mm silk dome tweeter, 15.2cm ER paper cone mid-bass driver
    ₹ 324,500
  • Scansonic MB1 B Bookshelf Speaker (Pair)

    Scansonic
    ₹ 324,900
    The Scansonic MB1 B is a stand-mount, two-way monitor. Our main goal was to create a small speaker that does what it does really well. The reflex port is placed in the front, and it uses special inlays that reduce noise to an extremely low level. While the speaker is small and stylish, the music performance is lively bright and bold, with a bass performance that defies its compact size. The speaker is front-ported to allow for placement near the rear wall. The MB-series features the same good solid, two-way binding post. The feet are machined from aircraft quality aluminum and can be adjusted to level the speaker. For added rigidness, we have added a carbon sheet to the top panel; this, paired with extensive internal bracing, makes the cabinet inert and silent. The MB ribbon tweeter has a membrane with an extremely low mass. It is formed by a Kapton-aluminum sandwich that is only 20 um thick, and the resulting mass is app. 0.03 g., which is approximately 50 times less than any conventional textile, ceramic, beryllium or diamond dome. The lower mass translates directly into higher resolution and less sound coloration. For the MB-series, we have developed a ridged, dustcap free, carbon membrane. By carefully optimizing the shape and stiffness, we have succeeded in making a very well performing woofer that blends beautifully with the ribbon tweeter. The woofer has an overhung magnet system, with long linear stroke and excellent bass performance. Cabinets The internal construction has an optimized airflow which combined with the minimalistic use of damping-material has created a very dynamic and linear low frequency reproduction. The ported cabinet is tuned for optimal impulse response – resulting in a linear, dynamic and detailed low-end reproduction, while at the same time making in room placement of the speaker very easy and versatile. Drivers The woofer and midrange drivers, have been fitted with low loss spider which greatly improves the dynamic capabilities as well as expanding the frequency response in the bass region. – A very nice side effect of this is that the break-in period has been reduced greatly (around 100 hours). Crossover The crossovers are designed for a very linear and natural sound, which is clearly audible throughout the whole line. The crossover has been designed to time-align all drive units at listening distance. The result is a speaker which not only presents a big and precise soundstage – it also boasts a timing that will make your foot tap and put a big smile on your face! For the MB-1 we have a dedicated stand, with MB-series matching aluminum adjustable feet. The MB-1 also fits the X-1 stand. Features Heavily braced enclosure Front Ported design Carbon Fiber Midwoofer Ribbon Tweeter Made in Denmark Specifications Size, mm. (BxHxD): 178 x 312 x 286 Weight, kg.: 6.1 per unit Freq. response: 45 Hz – 40 KHz Impedance: > 8 ohm Sensitivity: 86 db Crossover: 2600 Hz / Minimum phase Enclosure: Curved, heavily braced, ventilated box design with front loaded port Drive units: 1 x Ribbon tweeter · 1 x 5.25″ Mid/Woofer Black-silk, White-silk or Walnut Amplification: We recommend high quality amplifiers >50W Awards & Reviews Hi-Fi Choice
    ₹ 324,900
  • Sonus Faber Sonetto Center G2 - Centre Speaker

    Sonus Faber
    ₹ 324,900
    At the core of the home theater setup, the Sonetto Center elevates the listener into a completely immersive experience. The Sonetto Center brings decades of technological advancements from the Sonus faber development team into your home theater system. It introduces a fresh approach to voices reproduction for a speaker that will not be overlooked. The Sonetto Center honors Sonus faber’s signature lute-inspired design. The shape seamlessly integrates with the clean aesthetics and elegant proportions of the collection, blending the front baffle of the center channel with the cabinet to create a sleek, curved structure. CAMELIA MIDRANGE SPEAKER Initially developed for Suprema, the Camelia midrange speaker features the organic basket with a membrane inspired by the shape of the camelia flower. Its shape, with its five cuts, avoids the resonances found in typical circular shapes and enhances the Natural Sound signature to Sonus faber. The membrane is left unpainted to ensure total sound purity. ORGANIC BASKET Our organic basket embodies the fusion of advanced technology and nature-inspired design principles for enhanced sound reproduction. Present not only in our premier Reference and Homage Collection but also in the Sonetto G2 series, the basket’s asymmetrical shape provides structural support to the driver without recurring patterns. This distinctive design, evocative of natural forms, promotes superior airflow around the driver, guaranteeing impeccable sound quality. SILK DOME TWEETER The Sonetto Center features the silk dome tweeter with Damped Apex Dome, which allows a pristine and detailed high-frequency reproduction, completing the rich and balanced listening experience of the Sonetto G2 speakers LEATHER FLANGE The Italian tradition of leather craftsmanship enhances the flanges of the new Sonetto collection. A uniqueness in the world of High-Fidelity luxury speakers, Sonus faber is proud to be the undisputed master of this artisan detail. Specifications System 3.0 way, Midrange sealed enclosure, Woofers rear vented box Loudspeakers High-end quality drivers: Tweeter: 1,1" DAD™ Arrow Point extended frequency tweeter, Midrange: 1x 4" Camelia midrange, Copper shorting ring, Woofer: 2 x 6.5" woofers, Aluminum demodulation ring Crossover Points 350 Hz - 4000 Hz Frequency response 45 Hz - 40000 Hz Sensitivity 88 dB SPL (2.83 V/1m) Nominal impedance 4 Ohm Recommended power amplifier 50 W - 300 W Product dimensions 235 - 648 - 353 mm, 9.25 - 25.51 - 13.9 in Dimensions with packaging (HxWxD) 350 - 755 - 455 mm, 13.78 - 29.72 - 17.91 in Weight 17.63 kg / each, 38.87 lb /each Packaging weight 21.6 kg / one carton with one speaker / 47.6 lb / one cartonswith one speaker Cabinet Lute shape, Wood, Leather Support Manual
    ₹ 324,900
  • Sonus Faber Sonetto II G2 - Bookshelf Speaker (Pair)

    Sonus Faber
    ₹ 324,900- ₹ 441,800
    The Sonetto II bookshelf speakers are infused with the rich heritage of Italian craftsmanship and tradition. Offering not only exceptional sound quality, Sonetto II speakers also resonate with a profound appreciation for artistry and culture. Sonetto II is a 2-way speaker that inherits and elevates the distinguished Italian style of its predecessor. Through refined materials, sophisticated design, and enhanced acoustical advancements, Sonetto II recreates sound with an intense, unprecedented emotional impact and surprisingly powerful bass reproduction. Despite its dimensions, Sonetto II blends seamlessly with an array of environments. Its sleek aesthetics evoke an elegant and graceful style that enhances any space. Sonetto II embodies the iconic Sonus faber signature lute shape, a timeless design inspired by the elegance of musical instruments, specifically redesigned for the Sonetto G2 collection. Infused with the brand's renowned philosophy of Natural Sound, these speakers deliver perfect control over internal resonances, offering an unparalleled listening experience characterized by rich, lifelike audio ORGANIC BASKET Our organic basket embodies the fusion of advanced technology and nature-inspired design principles for enhanced sound reproduction. Present not only in our premier Reference and Homage Collections but also in the Sonetto G2 series, the basket’s asymmetrical shape provides structural support to the driver without recurring patterns. This distinctive design, evocative of natural forms, promotes superior airflow around the driver, guaranteeing impeccable sound quality. INTONO TECHNOLOGY Sonus faber Intono technology offers a construction solution designed to eliminate spurious frequencies and distortions within the cabinet, resulting in a quieter cabinet and an overall enhanced sound performance. Implemented in the Sonetto I and II speakers, Intono sits between the reflex duct and the internal acoustic chamber. REFLEX DUCT As with each speaker in the Sonetto G2 Collection, Sonetto II boasts a newly optimized duct design, strategically engineered to enhance flexibility in speaker placement. This innovative reflex duct, when combined with the concrete base, revolutionizes the listening experience by offering unparalleled versatility and performance. Whether positioned in a corner, against a wall, or in a freestanding configuration, the enhanced duct design ensures optimal airflow and resonance control, resulting in pristine sound reproduction across various room setups. By incorporating this advanced technology, Sonetto G2 speakers not only adapt effortlessly to diverse environments but also deliver consistently exceptional audio quality, elevating the standard of home entertainment. SILK DOME TWEETER The tweeter in the Sonetto G2 collection features state-of-the-art Silk Dome DAD™ (Damped Apex Dome) technology. With a response extending beyond 30kHz, made possible by the incorporation of a copper cup, the tweeter reproduces the finest nuances in the audio spectrum, ensuring exceptional clarity and detail in the pristine sound reproduction of Sonetto II. Specifications System 2,0 way Midwoofer front vented box Loudspeakers High-end quality drivers Tweeter: 1,1" DAD™ Arrow Point extended frequency tweeter, Copper shorting ring Midwoofer: 1x 6,5" Midwoofer, Aluminum demodulation ring Crossover Points 3100 Hz Frequency response 42 Hz - 40.000 Hz Sensitivity 87 dB SPL (2.83 V/1m) Nominal impedance 4 Ohm Recommended power amplifier 30 W - 200 W Product dimensions (HxWxD) 414 - 227 - 355 mm / each 16.3 - 8.94 - 13.98 in / each 687 - 355 - 406 mm (stand dimensions) 27.1 - 13.2 - 16 in (stand dimensions) Dimensions with packaging (HxWxD) 525 - 605 - 455 mm 20.67 - 23.82 - 17.91 in 831 - 437 - 615 mm (stand) 32.72 - 17.20 - 24.21 in (stand) Weight 10,40 kg / each 22.93 lb / each 6,50 kg (stand weight) 14.33 lb (stand weight) Packaging weight 23,4 kg / one carton inlcudes 2 speakers 51.6 in / one carton inlcudes 2 speakers 12 kg (stand) 26.46 lb (stand) Cabinet Lute shape Wood Leather Concrete Aluminum - Concrete - Iron Steel (stand) Support Manual Options Stands pictured are optional
    ₹ 324,900- ₹ 441,800
  • Final Model 3 Electrostatic Floorstanding Speaker [Pair]

    Final
    ₹ 328,000- ₹ 559,000
    Don't be fooled by its size - the Final Model 3 Hybrid Electrostatic Floorstanding Speaker is a small powerhouse that packs big sound. Its compact design makes it the perfect addition to any sound system, while its modular design ensures it will fit any space. You'll be amazed at the rich, superior sound these speakers can produce! Final electrostatic loudspeakers have significantly lower distortion than conventional motor-driven cones and domes. The combination of low mass, high speed, and instant acceleration and deceleration, reproduces the audio signal as close to perfect as any speaker ever has. Inspiring design It seems that the audio industry trade press and the Society of Industrial Designers think these speakers are pretty cool stuff. We think you will too. Dutch Design and Manufacture Final is founded in 1989 and made in The Netherlands by a dedicated group of physicists and engineers who also happen to be music lovers and home theatre fanatics. Why you should buy an electrostatic loudspeaker and why it should be a Final one The electrostatic loudspeaker was invented long ago. When it came available in a commercial version, the first customers were dedicated audiophiles and studio engineers. Obviously, both understood that a loudspeaker should be neutral in order to let the music flow without colouration and distortion. The ultimate goal? To be directly connected with live music, without a loudspeaker in between. During that time, there were already a lot of horn loudspeakers and dynamic systems. But most of them showed colouration and distortion and were less transparent than nowadays. The electrostatic technology is based on simple principles. But to build a good performing and above all long term reliable electrostatic panel needs extra effort. For instance, an electrostatic panel has a conductive foil. The conductive layer should have the same density for every square centimetre/inch of the foil. If not, the acceleration will be different for separate parts of the membrane, and it will lose dynamics causing some frequencies to have less impact. Die-hard lovers of electrostatic loudspeakers also know that the older membranes would require some maintenance. The older conductive material can deteriorate over time because it’s UV sensitive, dust should be removed on a regular base and after many years it might be necessarily to change the membrane. Nothing special or to worry about. It’s just like regularly servicing your car. However, Final has come up with some clever innovative ideas about the membrane. Due to new production technologies and advanced materials, the membrane’s density is very even. The material is extremely strong and insensitive for pollution and UV radiation. The membrane is very stable and energy efficient. When not using the panels for a short time, the power to the panels is automatically shut off. The panel will attract less dust and will last longer. When the panel senses a signal, the power is switched on automatically and the electrostatic system is at directly fully operable. This makes the Final panels to be very durable, high performant and extremely transparent, as if you are listening to live music. Although the world of horn loudspeakers and dynamic systems has evolved, electrostatic panel still have quite some differentiating advantages that sets them apart. Maybe today there are very expensive neutral and transparent high-end loudspeakers available, but they will always require crossovers that bring inherent trade off’s. An electrostatic panel does not have crossovers. Smaller panels could benefit from a crossover with a subwoofer, but the whole range between approximately 80 Hz and 20k does not need a crossover. Especially not in the sensitive midrange. There is no crossover distortion or resonances from separate drivers. Electrostatic panels are also masters in sound staging. Electrostatic panels do have a large radiating area. Sound reproduction is about accelerating air molecules. These panels are able to move a lot of air and thereby filling the room with a power full sound. It adds to the perception of reality. On top of that, Final electrostatic loudspeakers are very affordable. Nowadays, the market is crowded with loudspeakers with price tags from 30K and up. Some of them are truly very good. But the Final loudspeakers will bring all of the important musical attributes which are important for a realistic audio experience. Think about sound staging, detail, micro detail, neutrality, dynamics, room filling power, fastness and an impression of smashing reality. The bass of the larger Final panels is tune full, detailed and fast. An additional benefit besides their beautiful Dutch Design? Final loudspeakers are very light. When needed, one person can relocate them very easy. Features Improved performance, lower distortion Lightweight, ultra-thin design Modular components Highest resolution possible Flat vs. curved stators Made in The Netherlands Specifications Frequency response F lat panel (+/- 3db): 150 – 23.000Hz Frequency response Hybrid (+/- 3db): 55 – 23.000Hz Horizontal dispersion 20° Sensitivity 88 dB/2.83 volt (1 meter) Impedance 4 Ohm; 3 ohm at 20kHz Panel 123 (height) x 23 (width) cm Footplate 31.7 (length) x 24.3 (width) cm Weight 16 kg each Transducer Super linear electrostatic transducer Woofer (Hybrid) 8 inch long stroke hi-fi metal cone driver Recommended amplifier 20 to 200 watts per channel / 4, 5, or 8 Ohm compatible Components Custom-wound C core transformer, polypropylene capacitors, air coils, long stroke HiFi metal cone driver Inputs Custom 2-way binding posts Use Floor standing
    ₹ 328,000- ₹ 559,000
  • MoFi SourcePoint 10 Bookshelf Speaker (Pair)

    MoFi Electronics
    ₹ 332,900- ₹ 379,900
    The heart of the MoFi SourcePoint 10 is the innovative Twin-Drive high-flux neodymium magnet system. It is not enough to simply optimize the frequency response of the woofer and tweeter. It is also critically important to minimize distortion in the motor structure of the drive unit. If the motor has distortion, it will generate new frequencies outside of the original signal. We have been very deliberate with the design of the motor to reduce these distortions. The Twin-Drive system creates a fully symmetrical magnetic field, eliminating flux modulation for extremely low intermodulation distortion (IMD). This technical achievement is an important part of why the SourcePoint 10 sounds so pure and accurate. No, it won’t power your time-traveling DeLorean, but it will deliver the performance you’ve been searching for. THE 10-INCH CONCENTRIC DRIVER. TWO DRIVERS. ONE VOICE. Custom-developed by Andrew Jones through 18 months of R&D, the all-new 10-inch Concentric driver delivers stunning clarity and deep bass impact. The 10-inch paper-pulp cone has nearly 2.5x the surface area of a typical 6.5-inch bass driver, and barely needs to move in order to produce large and dynamic sound. This keeps a consistent waveguide around the tweeter for the most coherent sound possible, with the least amount of distortion, and without sacrificing bass. Fitted centrally within the bass driver is a 1.25-inch soft dome tweeter with a wide-roll surround and large diameter voice coil. The tweeter has great power handling and minimal thermal compression, allowing it to come in at 1.6kHz and deliver smooth response beyond 30kHz. The two drivers work together as one to create sound that is pure and powerful. HIGH-QUALITY CABINET CONSTRUCTION. BRACED FOR CLARITY. A large woofer requires a large cabinet that won’t add resonance. The SourcePoint 10 uses thick MDF panels and extensive internal bracing. The top, bottom, and sides are 1-inch thick MDF wrapped in beautiful real wood veneer. The faceted front baffle is 2-inch thick MDF finished in a smooth satin black coating. Two internal braces connect the top, sides, and bottom to further strengthen the cabinet. EASY TO DRIVE WITH THE ELECTRONICS YOU LOVE. With 91dB sensitivity, the SourcePoint 10 can be driven with as little as 30 watts of power. The nominal impedance of 8 ohms and a minimum impedance of 6.4-ohms means they are amplifier friendly. Whether you prefer tubes or transistors, your amp will pair well with these speakers. MULTI-FACETED 2-INCH THICK BAFFLE The front baffle is the launch point for your speaker driver. It needs to be strong and free of sound reflection. The SoucePoint 10 uses a sculpted baffle with multiple facets to eliminate diffraction. All you hear is the smooth and even response of the driver, not the sound of the cabinet. EASY TO USE MAGNETIC GRILLS It’s quick and easy to make your SourcePoint speakers more discrete for casual listening. The fabric-wrapped grills attach magnetically and are perfectly form-fitting to retain the profile of the distinguished multi-faceted baffle. For the highest performance, we recommend removing the grills while listening. FURNITURE GRADE REAL WOOD VENEERS You can choose the warmth and richness of Satin Walnut or the stealthy professional look of Satin Black Ash. The SourcePoint 10 uses furniture-grade real wood veneer that is book matched for mirror-imaged grain patterns on both of your speakers. The SourcePoints 10 has a unique combination of modern and classic style which suits a wide variety of interiors. Features 10-inch concentric driver 1.25-inch wide roll soft dome tweeter 2-way vented box Satin Walnut or Satin Black Ash real wood veneer 5-way binding posts Magnetic grilles Specifications Frequency Response 42Hz-30kHz Nominal Impedance 8 Ohms, 6.2 Ohms minimum Sensitivity 91dB/2.83V/1m Crossover Frequency 1.6kHz Minimum Recommended Power 30W Max Power Input 200W Dimensions (WxHxD) 14.5" x 22.5" x 16.6" with grille (368 x 572 x 422) / 14.5" x 22.5" x 16" without grille (368 x 572 x 406) Weight 46.2 lb / 21kg each Support Manual Datasheet
    ₹ 332,900- ₹ 379,900