The TEAC TN-280BT is a wireless turntable for new way of enjoying vinyl records. The TN-280BT is not only a great-sounding turntable for music enthusiastic who want to enjoy vinyl record from closet or re-issues. It brings you a totally new way of listening to vinyl records with its Bluetooth® capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth® speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.
The TN-280BT also accommodates a built-in Phono EQ amplifier that provides Line output, and allows you to connect to almost any sound system regardless type of inputs.
The belt-drive motor on the TN-280BT reduces vibration for sweeter, more accurate sound than direct-drive turntables for DJ, while an aluminum die-cast platter and anti-skating system provide a solid foundation for great-sounding playback. The high-performance, upgradable MM cartridge captures every detail on your record, and the static-balanced straight tone-arm ensures clear sound. It’s all housed in a handsome case in black or walnut veneer.
For music enthusiasts who want to hear every sensuous note of their vinyl collection.
Features
- Belt-drive turntable
- Built-in Bluetooth® transmitter
- Built-in MM phono equalizing amplifier
- PHONO, LINE, and Bluetooth® outputs
- High-performance MM cartridge included (Made in Japan)
- Aluminum die-cast platter with felt mat
- Anti-skating mechanism
- 2-speed (33-1/3, 45 rpm)
- High-density MDF cabinet for better vibration and resonance
- Sleek design in black or walnut finish
Technical Specifications
| Turntable section | |
| Motor | DC Motor |
| Speed | 33 1/3 RPM, 45 RPM RPM |
| Wow and Flutter | 0.2% |
| Signal-to-Noise Ratio | 67dB or higher (A-weighted, 20kHz LPF) 60dB (unweighted, 20kHz, LPF) |
| Platter | Aluminum Die-cast |
| Diameter of Platter | 12", 30cm |
| Tonearm section | |
| Type | Static Balance, Straight |
| Effective Arm Length | 8.8", 223mm |
| Stylus Pressure Range | 0 to 5g |
| Compatible Cartridge Range | 3.5 to 6.5g |
| Anti-skating Adjustment | Supported |
| Cartridge section | |
| Type | MM-type |
| Stylus Shape | Elliptical |
| Mount | Half inch |
| Frequency Response | 20Hz to 20kHz |
| Channel Separation | 20dB at 1kHz |
| Channel Balance | 2.0dB |
| Tracking Forcee | 1.5 to 2.5g |
| Vertical Tracking Angle | 20 degrees |
| Output Impedance | 47k ohms |
| Output Voltage | 4.5mV (±3%) |
| Stylus Pressure | 2.0g (±0.5g) |
| Cartridge Weight | 5.7g (±0.5g) |
| Head-shell Weight | 10g (including nuts, screws and wires) |
| Analog Output section | |
| Connectors | RCA Pin x 1 pair (Chrome-plated) |
| Output Voltage | |
| PHONO | 4.5mV (±3dB) |
| LINE | 120mV (–13dBV) |
| Bluetooth® section | |
| Range | Approx. 30ft. / 10 meters |
| Supported Codec | SBC |
| General | |
| Power | AC 100 to 240V, 50/60Hz |
| Power Consumption | < 1.5W (< 0.5W at Standby) |
| Overall Dimensions (W x H x D) |
16.5" x 4.6" x 14.0" 420 x 117 x 356 mm |
| Weight | Approx. 10.8 lbs. 4.9 kg |
| Accessories | Rubber Sheet, EP Adapter, Counter Weight, Head-shell (MM-type Cartridge installed), Turntable (Platter), Dust Cover, Rubber Feet fro Dust Cover x2, Hinge x2, RCA Audio Cable, AC Adapter (GPE053A-120050-Z), Owner's Manual (including Warranty Card) |
| Replacement Stylus | STL-122 |
Support
Reviews
